Abstract
This specification covers for several grades of carbon and alloy steel mechanical tubing, either hot-finished or cold-finished. The steel used in the mechanical tubing may be cast in ingots or may be strand cast. When steel of different grades is sequentially strand cast, identification of the resultant transition material is required. The seamless tubing is a tubular product made without a welded seam. It is usually manufactured by hot working steel, and if necessary, by subsequently cold finishing the hot-worked tubular product to produce the desired shape, dimensions and properties. The tubes shall be furnished in the following shapes: round, square, rectangular and special sections. Heat analysis shall be made to determine the percentages of the elements specified. If secondary melting processes are used, the heat analysis shall be obtained from one remelted ingot or the product of one remelted ingot of each primary melt. The tubing shall be coated with a film of oil before shaping to retard rust when specified
Scope
1.1 This specification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the condition of the components, and the intended service.
| Grade | Chemical Composition Limits, % | |||
| CarbonA | ManganeseB | Phosphorus,B | Sulfur,B | |
|
| ||||
| MT 1010 | 0.05–0.15 | 0.30–0.60 | 0.040 | 0.050 |
| MT 1015 | 0.10–0.20 | 0.30–0.60 | 0.040 | 0.050 |
| MT X 1015 | 0.10–0.20 | 0.60–0.90 | 0.040 | 0.050 |
| MT 1020 | 0.15–0.25 | 0.30–0.60 | 0.040 | 0.050 |
| MT X 1020 | 0.15–0.25 | 0.70–1.00 | 0.040 | 0.050 |
| Grade | Chemical Composition Limits, %A | |||
| Carbon | Manganese | Phosphorus, | Sulfur, | |
|
| ||||
| 1008 | 0.10 max | 0.30–0.50 | 0.040 | 0.050 |
| 1010 | 0.08–0.13 | 0.30–0.60 | 0.040 | 0.050 |
| 1012 | 0.10–0.15 | 0.30–0.60 | 0.040 | 0.050 |
| 1015 | 0.13–0.18 | 0.30–0.60 | 0.040 | 0.050 |
| 1016 | 0.13–0.18 | 0.60–0.90 | 0.040 | 0.050 |
| 1017 | 0.15–0.20 | 0.30–0.60 | 0.040 | 0.050 |
| 1018 | 0.15–0.20 | 0.60–0.90 | 0.040 | 0.050 |
| 1019 | 0.15–0.20 | 0.70–1.00 | 0.040 | 0.050 |
| 1020 | 0.18–0.23 | 0.30–0.60 | 0.040 | 0.050 |
| 1021 | 0.18–0.23 | 0.60–0.90 | 0.040 | 0.050 |
| 1022 | 0.18–0.23 | 0.70–1.00 | 0.040 | 0.050 |
| 1025 | 0.22–0.28 | 0.30–0.60 | 0.040 | 0.050 |
| 1026 | 0.22–0.28 | 0.60–0.90 | 0.040 | 0.050 |
| 1030 | 0.28–0.34 | 0.60–0.90 | 0.040 | 0.050 |
| 1035 | 0.32–0.38 | 0.60–0.90 | 0.040 | 0.050 |
| 1040 | 0.37–0.44 | 0.60–0.90 | 0.040 | 0.050 |
| 1045 | 0.43–0.50 | 0.60–0.90 | 0.040 | 0.050 |
| 1050 | 0.48–0.55 | 0.60–0.90 | 0.040 | 0.050 |
| 1518 | 0.15–0.21 | 1.10–1.40 | 0.040 | 0.050 |
| 1524 | 0.19–0.25 | 1.35–1.65 | 0.040 | 0.050 |
| 1541 | 0.36–0.44 | 1.35–1.65 | 0.040 | 0.050 |
1.2 This specification covers both seamless hot-finished mechanical tubing and seamless cold-finished mechanical tubing in sizes up to and including 12 3/4 in. (323.8 mm) outside diameter for round tubes with wall thicknesses as required.
1.3 The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square, rectangular, and special sections.
