Documents Share & AVA Documents Free Downloads of Technical Documents, Standards, Industry Codes, and Regulations
Documents Documents Document Sharing Hub

    ASTM A66-01

    system ASTM 2017-08-16 13 PDF 370 0 2026-07-03 17:28
    summary
    Standard Specification for Steel Screw Spikes
    description

    Scope

    1.1 This specification covers steel screw spikes used as fastenings between railroad rails, tie plates, and ties.

    1.2 Supplementary Requirement S1 Specifying Copper Content is provided. It shall apply only when specified by the purchaser.

    1.3 The values stated in inch-pound units are to be regarded as the standard.

    Details
    Publisher ASTM
    File size 47.53 KB
    Pages 3
    Format PDF
    Publication date 2017-08-16

    Related Products

    More
    ★★★★★ ASTM A6/A6M-01 ASTM A6/A6M-01 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling ★★★★★ ASTM A20/A20M-01 ASTM A20/A20M-01 Standard Specification for General Requirements for Steel Plates for Pressure Vessels ★★★★★ ASTM D4328-18 ASTM D4328-18 Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines ★★★★★ ASTM D4330-94(2002) ASTM D4330-94(2002) Standard Practice for Evaluation of Fiberglass Boat Polish and Wax ★★★★★ ASTM D6954-24 ASTM D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation ★★★★★ ASTM D1003-21 ASTM D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics ★★★★★ ASTM D3363-22 ASTM D3363-22 Standard Test Method for Film Hardness by Pencil Test ★★★★★ ASTM D5329-16 ASTM D5329-16 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements ★★★★★ ASTM D653-26a Standard Terminology Relating to Soil, Rock, and Contained Fluids ASTM D653-26a Standard Terminology Relating to Soil, Rock, and Contained Fluids This ASTM terminology standard defines terms used in soil, rock, groundwater, grouting, geotechnical engineering, and related Committee D18 standards. ★★★★★ ASTM D613-26 Standard Test Method for Cetane Number of Diesel Fuel Oil ASTM D613-26 Standard Test Method for Cetane Number of Diesel Fuel Oil This standard establishes a test method for determining the cetane number of diesel fuel oil using a standardized single-cylinder, four-stroke-cycle, variable-compression-ratio diesel engine. ★★★★★ ASTM E29-06b ASTM E29-06b Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications ★★★★★ ASTM D5329-15 ASTM D5329-15 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements ★★★★★ ASTM D4329-21 ASTM D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics ★★★★★ ASTM D4328-97 ASTM D4328-97 Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines ★★★★★ Standard Test Method for the Sieve Analysis of Coke Standard Test Method for the Sieve Analysis of Coke This test method determines the size distribution of coke by separating a sample into defined sieve fractions and reporting each fraction as a percentage of the gross sample mass.