Scope
1.1 This specification establishes requirements for the material properties, including dimensional stability, weatherability, and extrusion quality, of rigid poly(vinyl chloride) (PVC) exterior profile extrusions used for assembled windows and doors. Methods for testing and for identifying exterior profile extrusions that comply with this specification are also provided.
1.2 Rigid PVC recycled plastic may be used in this product in accordance with requirements in Section 5.
Note 1—Information with regard to application, assembly, and installation should be obtained from the manufacturers of the profiles and of the windows and doors.
Note 2—Refer to Specification D 3678 for interior profile extrusions.
1.3 Color-hold guidelines are provided in an appendix for the manufacturer's product development and quality performance use.
1.4 Color-hold guidelines are presently limited to white, grey, beige, light brown, and dark brown (see Figs. X1.1 through X1.5). Additional colors will be added as color guidelines are developed.
1.5 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.
Note 3—There are no ISO standards covering the primary subject matter of this specification.
1.6 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard.
1.7 The following safety hazards caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
