| | Section |
| Scope | 1 |
| Referenced Documents | 2 |
| Terminology | 3 |
| Summary of Test Method | 4 |
| Significance and Use | 5 |
| Apparatus (General Description) | 6 |
| Apparatus (The Test Engine) | 7 |
| | Sequence VG Test Engine | 7.1 |
| | Required New Engine Parts | 7.2 |
| | Reusable Engine Parts | 7.3 |
| | Specially Fabricated Engine Parts | 7.4 |
| | Special Engine Measurement and Assembly Equipment | 7.5 |
| | Miscellaneous Engine Components-Preparation | 7.6 |
| | Solvents and Cleaners Required | 7.7 |
| | Assembling the Test Engine-Preparations | 7.8 |
| | Assembling the Test Engine-Installations | 7.9 |
| | Engine Installation on the Test Stand | 7.10 |
| Engine Fluids (Supply/Discharge Systems) | 8 |
| | Intake Air | 8.1 |
| | Fuel and Fuel System | 8.2 |
| | Engine Oil and Engine Oil System | 8.3 |
| | Coolants | 8.4 |
| Measurement Instrumentation | 9 |
| | Temperatures | 9.1 |
| | Pressures | 9.2 |
| | Flow Rates | 9.3 |
| | Fuel Consumption | 9.4 |
| | Speed and Load | 9.5 |
| | Exhaust Gas | 9.6 |
| | Humidity | 9.7 |
| Miscellaneous Laboratory Equipment | 10 |
| Test Stand Calibration | 11 |
| Test Procedure | 12 |
| | Pre-Test Procedure | 12.1 |
| | Engine Operating Procedure | 12.2 |
| | Periodic Measurements and Functions | 12.3 |
| | Special Maintenance Procedures | 12.4 |
| | Diagnostic Data Review | 12.5 |
| | End of Test Procedure | 12.6 |
| Interpretation of Test Results | 13 |
| | Parts Rating Area-Environment | 13.1 |
| | Sludge Ratings | 13.2 |
| | Varnish Ratings | 13.3 |
| | Clogging | 13.4 |
| | Sticking | 13.5 |
| | Used Oil Analyses | 13.6 |
| | Additional Measurements | 13.7 |
| Assessment of Test Validity | 14 |
| | General | 14.1 |
| | Used Oil Analyses-Interpretation | 14.2 |
| | Blowby Flow Rate | 14.3 |
| | Manifold Absolute Pressure | 14.4 |
| | Fuel Consumption Rate | 14.5 |
| | Oil Consumption | 14.6 |
| | Engine Parts Replacement | 14.7 |
| | Quality Index and Deviation Percentage | 14.8 |
| Final Test Report | 15 |
| | Report Forms | 15.1 |
| Precision and Bias | 16 |
| Keywords | 17 |
| ANNEXES | |
| | Safety Hazards | Annex A1 |
| | Control and Data Acquisition Requirements | Annex A2 |
| | Detailed Specifications and Photographs of Apparatus | Annex A3 |
| | Special Service Tools for the Test Engine | Annex A4 |
| | Test Engine Part Number Listing | Annex A5 |
| | External Oil Heat Exchanger Cleaning Technique | Annex A6 |
| | Sequence VG Report Forms and Data Dictionary | Annex A7 |
| | Dipstick Calibration | Annex A8 |
| | Critical Part Supplier List | Annex A9 |
| | Operational Data Log-Engine Oil | Annex A10 |
| | Rating Worksheets | Annex A11 |
| | Fuel Injector Flow Measurements | Annex A12 |
| APPENDIXES | |
| | Piston and Ring Measurements Record Forms | Appendix X1 |
| | Sources of Materials and Information | Appendix X2 |
| | Description of Scott Quarterly Gas Audit Service | Appendix X3 |
