Abstract
These test methods detail the standard procedures for the chemical analysis of soaps containing synthetic detergents. The analytical procedures include the determination of the following chemical properties and substances: moisture and other matter volatile at a specified temperature; free alkali or free acid; anhydrous, salt-free soda soap; alcohol-soluble matter; matter insoluble in water; total alkalinity of matter insoluble in alcohol (alkaline salts); sodium silicate; phosphates; phosphates by colorimetric method using molybdenum blue); unsaponified and unsaponifiable matter; free fatty matter; chlorides in alcohol-soluble matter; rosin by McNicoll method; synthetic detergent by difference; and neutral inorganic salts.
Scope
1.1 These test methods cover procedures for the chemical analysis of soaps containing synthetic detergents.
1.2 The analytical procedures appear in the following order:
| Sections | |
| Moisture and Other Matter Volatile at 105°C (Oven Method) | 5 and 6 |
| Free Alkali or Free Acid | 7 and 8 |
| Anhydrous, Salt-Free, Soda Soap | 9-12 |
| Alcohol-Soluble Matter | 13 and 14 |
| Matter Insoluble in Water | 15 |
| Total Alkalinity of Matter Insoluble in Alcohol (Alkaline Salts) | 16 and 17 |
| Sodium Silicate | 18-20 |
| Phosphates | 21-28 |
| Phosphate (Colorimetric Method Using Molybdenum Blue) | 29-34 |
| Unsaponified and Unsaponifiable Matter | 35-39 |
| Free Fatty Matter | 40 |
| Chlorides in Alcohol-Soluble Matter | 41-43 |
| Rosin (McNicoll Method) | 44-47 |
| Synthetic Detergent (by Difference) | 48 |
| Neutral, Inorganic Salts | 49 |
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
