Significance and Use
While federal criteria and state standards exist that define acute and chronic “safe” levels in the water column, effects levels in the sediment are poorly defined and may be dependent upon numerous modifying factors. Even where USEPA recommended Water Quality Criteria (WQC, (35)) are not exceeded by water-borne concentrations, organisms that live in or near the sediment may still be adversely affected (36). Therefore, simply measuring the concentration of a chemical in the sediment or in the water is often insufficient to evaluate its actual environmental toxicity. Concentrations of contaminants in sediment may be much higher than concentrations in overlying water; this is especially true of hydrophobic organic compounds as well as inorganic ions that have a strong affinity for organic ligands and negatively-charged surfaces. Higher chemical concentrations in sediment do not, however, always translate to greater toxicity or bioaccumulation (37), although research also suggests that amending sediment with organic matter actually increases the bioaccumulation of contaminant particles (38, 39). Other factors that can potentially influence sediment bioaccumulation and toxicity include pH mineralogical composition, acid-volatile sulfide (AVS) and grain size (40, 41). Laboratory toxicity tests provide a direct and effective way to evaluate the effects of sediment contamination on environmental receptors while providing empirical consideration of all of the physical, chemical and biological parameters that may influence toxicity.
Amphibians are often a major ecosystem component of wetlands around the world, however limited data are available regarding the effects of sediment-bound contaminants to amphibians (30-32, 41-43). Laboratory studies such as the procedure described in this standard are one means of directly assessing sediment toxicity to amphibians in order to evaluate potential ecological risks in wetlands.
Results from sediment testing with this procedure may be useful in developing chemical-specific sediment screening values for amphibians.
Sediment toxicity test can be used to demonstrate the reaction of test organisms to the specific combination of physical and chemical characteristics in an environmental medium. The bioavailability of chemicals is dependent on a number of factors, which are both site-specific and medium-specific. Although many of these factors can be estimated using equilibrium partitioning techniques, it is difficult to account for all the physical and chemical properties which could potentially affect bioavailability. Sediment toxicity tests may be particularly applicable to evaluating hydrophobic compounds which may not readily partition into the water column. See Table 1 for a summary of advantages and disadvantages associated with sediment toxicity tests.
TABLE 1 Advantages and Disadvantages for Use of Sediment Tests (Modified from Test Method E 1706
| Advantages |
| Measure bioavailable fraction of contaminant(s). |
| Provide a direct measure of effects on sediment-associated receptors (benthos, larval amphibians), assuming no field adaptation or amelioration of effects. |
| Limited special equipment is required. |
| Methods are rapid and inexpensive. |
| Legal and scientific precedence exist for use; USEPA and ASTM standard methods and guides are available. |
| Measure unique information relative to chemical analyses or community analyses. |
| Tests with spiked chemicals provide data on cause-effect relationships. |
| Sediment-toxicity tests can be applied to all chemicals of concern. |
| Tests applied to field samples reflect cumulative effects of contaminants and contaminant interactions. |
| Toxicity tests are amenable to confirmation with natural populations (invertebrate or amphibian surveys). |
| Disadvantages |
| Sediment collection, handling, and storage may alter bioavailability. |
| Spiked sediment may not be representative of field contaminated sediment. |
| Natural geochemical characteristics of sediment may affect the response of test organisms. |
| Indigenous animals may be present in field-collected sediments. |
| Route of exposure may be uncertain and data generated in sediment toxicity tests may be difficult to interpret if factors controlling the bioavailability of contaminants in sediment are unknown. |
| Tests applied to field samples may not discriminate effects of individual chemicals. |
| Few comparisons have been made of methods or species. |
| Only a few chronic methods for measuring sublethal effects have been developed or extensively evaluated. |
| Laboratory tests have inherent limitations in predicting ecological effects. |
| Tests do not directly address human health effects. |
| Motile organisms may be able to avoid prolonged exposure to contaminated media so tests may overestimate actual exposure. |
| Species used in toxicity testing programs are typically chosen to be representative and protective of the organisms found on-site, but the use of surrogate species cannot precisely predict the health of ecological communities on-site. |
| Toxicity to organisms in situ may be dependent upon physical characteristics and equilibrium partitioning that are not readily replicated under laboratory conditions. |
Scope
1.1 This standard covers procedures for obtaining laboratory data concerning the toxicity of test material (for example, sediment or hydric soil (that is, a soil that is saturated, flooded, or ponded long enough during the growing season to develop anaerobic (oxygen-lacking) conditions that favor the growth and regeneration of hydrophytic vegetation)) to amphibians. This test procedure uses larvae of the northern leopard frog (Rana pipiens). Other anuran species (for example, the green frog (Rana clamitans), the wood frog (Rana sylvatica), the American toad (Bufo americanus)) may be used if sufficient data on handling, feeding, and sensitivity are available. Test material may be sediments or hydric soil collected from the field or spiked with compounds in the laboratory.
1.2 The test procedure describes a 10-d whole sediment toxicity test with an assessment of mortality and selected sublethal endpoints (that is, body width, body length). The toxicity tests are conducted in 300 to 500-mL chambers containing 100 mL of sediment and 175 mL of overlying water. Overlying water is renewed daily and larval amphibians are fed during the toxicity test once they reach Gosner stage 25 (operculum closure over gills). The test procedure is designed to assess freshwater sediments, however, R. pipiens can tolerate mildly saline water (not exceeding about 2500 mg Cl-/L, equivalent to a salinity of about 4.1 when Na+ is the cation) in 10-d tests, although such tests should always include a concurrent freshwater control. Alternative test durations and sublethal endpoints may be considered based on site-specific needs. Statistical evaluations are conducted to determine whether test materials are significantly more toxic than the laboratory control sediment or a field-collected reference sample(s).
1.3 Where appropriate, this standard has been designed to be consistent with previously developed methods for assessing sediment toxicity to invertebrates (for example, Hyalella azteca and Chironomus dilutus toxicity tests) described in the United States Environmental Protection Agency (USEPA, (1)) freshwater sediment testing guidance, Test Methods E 1367
1.4 Many historical amphibian studies, both water and sediment exposure, have used tests of shorter duration (5 days or less) (for example, 4-7) and, although both survival and sublethal endpoints were often assessed, there is substantive evidence that tests of longer duration are likely to be more sensitive to some contaminants (8, 9). Research performed to develop and validate this test protocol included long-term (through metamorphosis) investigations and other researchers have also conducted long-duration tests with anurans (7-11). In the development of these procedures, an attempt was made to balance the needs of a practical assessment with the importance of assessing longer-term effects so that the results will demonstrate the needed accuracy and precision. The most recent sediment toxicity testing protocols for invertebrates have encompassed longer duration studies which allow the measurement of reproductive endpoints (1, 12). Such tests, because of increased sensitivity of the sublethal endpoints, may also be helpful in evaluating toxicity. Full life-cycle studies with anurans (including reproduction) are usually not feasible from either a technical or monetary standpoint. However, if site-specific information indicates that the contaminants present are likely to affect other endpoints (including teratogenicity), then the duration of the toxicity test may be increased through metamorphosis or additional sublethal endpoints may be measured (for example, impaired behavior, deformities, time-to-metamorphosis). The possible inclusion of these endpoints and extension of test length should be considered during development of the project or study plan (see 8.1.1).
1.5 The methodology presented in this standard was developed under a Department of Defense (DoD) research program and presented in a guidance manual for risk assessment staff and state/federal regulators involved in the review and approval of risk assessment work plans and reports (13). To develop this method, a number of tests with spiked sediment tests were conducted (13, 14). Since development of the methodology it has been used operationally to evaluate field-collected sediments from several state and federal environmental sites (15, 16). For most of these studies the preferred test organisms, Rana pipiens, was used. At a lead-contaminated state-led site, operated by the Massachusetts Highway Department, Xenopus laevis (African clawed frog) was used in the sediment test system because of availability problems with Rana pipiens (17), The test method was also used to evaluate sediment toxicity at a cadmium-contaminated USEPA Region 4-led site in Tennessee (18). The methodology was used to help characterize potential effects of contaminants on amphibians and to help develop preliminary remedial goals, if warranted. All tests evaluated survival and growth effects after 10 d of exposure in accordance with the methods presented in this standard.
1.6 The use of larval amphibians to assess environmental toxicity is not novel. Researchers have used tadpoles to examine toxicity of metals and organic compounds. Most of these studies have been through water exposure, usually in a manner similar to fish or invertebrate exposure as described in Guide E 729
1.6.1 Sediment toxicity tests conducted in the laboratory with amphibians were performed over a range of test durations from 4 d (4, 31, Guide E 1439-98
1.6.2 To assess the effect of direct contact with the sediments containing PCBs, Savage et al. (32) exposed larval tadpoles (Gosner stage 23 to 25; wood frogs (R. sylvatica)) to field-collected sediments under conditions that allowed both direct contact with the sediment and separation from the sediment with a 500 μm mesh barrier. The study found that lethal and sublethal effects on tadpoles observed through metamorphosis were more pronounced when direct contact with the sediment was allowed. The test conditions described in this standard allow tadpoles to maintain direct contact with the sediment.
1.6.3 Sediment toxicity testing with Xenopus laevis has focused on evaluating the developmental effects of sediment extracts, as opposed to whole sediments, on frog embryos. Methods have been developed which expose blastula stage embryos to sediment by enclosing the embryos in a Teflon mesh insert that rests over the top of the sediment in the sediment–water interface region (31, Guide E 1439-98
1.7 Sediment toxicity tests are an effective means for evaluating the impact of sediment contamination on amphibians in a multiple lines of evidence paradigm. The evaluation is most powerful when toxicity testing sampling stations are co-located with sediment analytical chemistry samples and ecological surveys, allowing for a detailed evaluation of the co-occurring data in the ecological risk assessment. The spatial and temporal co-location of toxicity testing and analytical samples is particularly important for establishing contaminant-specific effects and assessing contaminant bioavailability.
1.8 In order for a sediment toxicity test to be sensitive it must be of sufficient duration to measure potential toxicity and it must be conducted during the appropriate developmental stage of the test organism’s life cycle. Using recently hatched tadpoles and conducting the sediment exposure test for 10 d to allow the evaluation of growth endpoints meets both of these sensitivity requirements.
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
