Significance and Use
8.1 The procedures described are those that will test the behavior of segments of wall construction under conditions representative of those encountered in service. Performance criteria based on data from those procedures can ensure structural adequacy and service life.
Scope
1.1 These test methods cover the following procedures for determining the structural properties of segments of wall, floor, and roof constructions:
|
| Section |
| Test Specimens | 3 |
| Loading | 4 |
| Deformation Measurements | 5 |
| Reports | 6 |
| Precision and Accuracy | 7 |
| TESTING WALLS | |
| Significance and Use | 8 |
| Compressive Load | 9 |
| Tensile Load | 10 |
| Transverse Load—Specimen Horizontal | 11 |
| Transverse Load—Specimen Vertical | 12 |
| Concentrated Load | 13 |
| Impact Load—See Test Methods E695 and |
|
| Racking Load—Evaluation of Sheathing | 14 |
| Racking Load—Evaluation of Sheathing | 15 |
| TESTING FLOORS | |
| Significance and Use | 16 |
| Transverse Load | 17 |
| Concentrated Load | 18 |
| Impact Load—See Test Methods E695 and |
|
|
| |
|
|
|
| TESTING ROOFS |
|
|
| Section |
| Significance and Use | 19 |
| Transverse Load | 20 |
| Concentrated Load | 21 |
| APPENDIX | |
| Technical Interpretation | Appendix X1 |
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.2.1 Exception—SI units are used in Fig. 6.
