ESDU STRUCT 00.06.04 A 1980
Shear centre of circular arc section.
ESDU TM 176A 2015
Effective phase angle in tyre-friction modelling
ESDU 78001 A 2007
The momentum-change component of pressure change in two-phase flow and other non-equilibrium effects.
ESDU 99016 A 2010
Example of statistical analysis of wet runway friction: aircraft with extensive set of test data
ESDU 99001 1999
Geneva mechanisms. Part 4: advanced examples.
ESDU 89004 1989
Effect of fretting on fatigue strength of aluminium alloys.
ESDU STRUCT 02.01.50 1964
Initial buckling of slightly curved plates under combined longitudinal and circumferential direct stress. (All edges ...
ESDU 96037 A 2006
A qualitative introduction to static aeroelasticity: controllability, loads and stability.
ESDU 05015 2005
Normal force and pitching moment of non-circular bodies: elliptical cross-sections at supersonic speeds.
ESDU 77020 A 1996
Subsonic pressure drag of conical boat-tails.
Hot Products
ESDU 95014 1995
Upwash interference for wings in solid-liner wind tunnels using subsonic linearised-theory.
ESDU 07004 A 2010
Flow in rotating components - discs, cylinders and cavities
ESDU 05020 2005
Thermal conductivity of liquids: Aliphatic hydrocarbons. Part 1. Alkanes.
ESDU TN 08008 A 2009
CFD studies for the validation of friction losses and flow characteristics in circular straight pipes with smooth walls
ESDU 93009 1993
Vapour pressures and critical points of liquids: Aliphatic and cyclic ketones.
ESDU 89006 C 2003
Vapour pressures and critical points of liquids: Halogenated C3 and higher hydrocarbons.
ESDU 96025 F 2010
Drag due to lift for non-planar swept wings up to high angles of attack at subsonic speeds
ESDU 98016 2000
Elastic buckling of flat isotropic stiffened panels and struts in compression.
ESDU 00020 2000
Guide to industrial water conservation. Part 1. Water re-use in single contaminant systems.
ESDU 16004 2019
Aerodynamics and aero-acoustics of rectangular planform cavities. Part V: Bibliography (up to 2016)
ESDU 81040 D 2004
The stability and response of linear systems. Part VII: examples.
ESDU 05007 2007
Strain-life data for type 316 austenitic stainless steels at temperatures between -269 and 816 degrees C (-452 and 15...
ESDU 20003 2019
Crack resistance curves
ESDU 00035 E 2013
Aircraft Performance Program Part 5: Detailed input and output Program APP02
ESDU 90009 1990
Fatigue of aluminium alloy joints with various fastener systems. Medium load transfer.
ESDU 07010 2007
Extrapolating wind-tunnel data to full-scale Reynolds number Part 2: Procedures
ESDU 98012 2001
Flexibility of, and load distribution in, multi-bolt lap joints subject to in-plane axial loads.
ESDU 00025 A 2014
Computer program for prediction of aircraft lateral stability derivatives in sideslip at subsonic speeds
ESDU 94008 C 2010
Lubricant film thickness between disc cams and followers
ESDU 90026 B 1994
Inelastic bending moments, end loads, stresses and strains for beam sections of general polygonal shape.