ESDU PERF RP 2/0 A 2009
General method of performance reduction for piston-engined aircraft with constant-speed propellers
ESDU SPF-M3-6 2007
Fluid Dynamic Gauging in annular geometries.
ESDU 11008 2011
Compendium of modal densities Part 1: rods, beams and plates
ESDU STRUCT 00.06.01 A 1980
Method of calculating stress distribution in a reinforced symmetrical shell under bending.
ESDU 73006 C 1999
Effects of isolated body and wing-body interference on rolling moment due to sideslip: L sub v (with Addendum A for n...
ESDU 02013 A 2006
Full-potential (FP) method for three-dimensional wings and wing-body combinations - inviscid flow. Part 1: Principles...
ESDU STRUCT 02.01.24 A 1977
Stiffness after buckling. Flat rectangular plates in compression. (Edges simply-supported.)
ESDU 84026 C 1999
Aerofoil maximum lift coefficient for Mach numbers up to 0.4.
ESDU 88028 1988
Flow induced acoustic resonance in tubular heat exchangers.
ESDU 74019 C 2006
The stability and response of linear systems. Part 1: Introduction.
Hot Products
ESDU 95014 1995
Upwash interference for wings in solid-liner wind tunnels using subsonic linearised-theory.
ESDU 07004 A 2010
Flow in rotating components - discs, cylinders and cavities
ESDU 05020 2005
Thermal conductivity of liquids: Aliphatic hydrocarbons. Part 1. Alkanes.
ESDU 89006 C 2003
Vapour pressures and critical points of liquids: Halogenated C3 and higher hydrocarbons.
ESDU TN 08008 A 2009
CFD studies for the validation of friction losses and flow characteristics in circular straight pipes with smooth walls
ESDU 93009 1993
Vapour pressures and critical points of liquids: Aliphatic and cyclic ketones.
ESDU 96025 F 2010
Drag due to lift for non-planar swept wings up to high angles of attack at subsonic speeds
ESDU 98016 2000
Elastic buckling of flat isotropic stiffened panels and struts in compression.
ESDU 00020 2000
Guide to industrial water conservation. Part 1. Water re-use in single contaminant systems.
ESDU 81040 D 2004
The stability and response of linear systems. Part VII: examples.
ESDU 16004 2019
Aerodynamics and aero-acoustics of rectangular planform cavities. Part V: Bibliography (up to 2016)
ESDU 05007 2007
Strain-life data for type 316 austenitic stainless steels at temperatures between -269 and 816 degrees C (-452 and 15...
ESDU 00035 E 2013
Aircraft Performance Program Part 5: Detailed input and output Program APP02
ESDU 20003 2019
Crack resistance curves
ESDU 90009 1990
Fatigue of aluminium alloy joints with various fastener systems. Medium load transfer.
ESDU 07010 2007
Extrapolating wind-tunnel data to full-scale Reynolds number Part 2: Procedures
ESDU 98012 2001
Flexibility of, and load distribution in, multi-bolt lap joints subject to in-plane axial loads.
ESDU 00025 A 2014
Computer program for prediction of aircraft lateral stability derivatives in sideslip at subsonic speeds
ESDU 94008 C 2010
Lubricant film thickness between disc cams and followers
ESDU 90026 B 1994
Inelastic bending moments, end loads, stresses and strains for beam sections of general polygonal shape.