ESDU STRUCT 02.01.11 B 1978
Average and edge stresses for slightly curved plates with clamped edges in compression with initial irregularities.
ESDU 98023 1998
OSMEC. Computer mechanism design: basic examples.
ESDU TD MEMO 6309 A 1967
Graphical method for estimating the spanwise distribution of aerodynamic centre on wings in subsonic flow.
ESDU 98001 1998
Estimation of airframe skin-friction drag due to impingement of tyre spray.
ESDU 88008 1988
Fatigue limit of unnotched steels (related to tensile strength).
ESDU 82001 A 2007
An introduction and guide to noise in ventilation, air-conditioning and other ducting systems.
ESDU 97032 1997
Static aeroelasticity: a formal analysis using assumed modes.
ESDU 87033 C 1992
Normal force and pitching moment of conical boat-tails.
ESDU 76028 A 1995
Lift-interference and blockage corrections for two-dimensional subsonic flow in ventilated and closed wind-tunnels.
ESDU AERO A.S.06.03.04 B 1987
Spanwise centre of pressure of isolated lifting surface at supersonic speeds.
Hot Products
ESDU 95014 1995
Upwash interference for wings in solid-liner wind tunnels using subsonic linearised-theory.
ESDU 07004 A 2010
Flow in rotating components - discs, cylinders and cavities
ESDU 05020 2005
Thermal conductivity of liquids: Aliphatic hydrocarbons. Part 1. Alkanes.
ESDU 89006 C 2003
Vapour pressures and critical points of liquids: Halogenated C3 and higher hydrocarbons.
ESDU 93009 1993
Vapour pressures and critical points of liquids: Aliphatic and cyclic ketones.
ESDU TN 08008 A 2009
CFD studies for the validation of friction losses and flow characteristics in circular straight pipes with smooth walls
ESDU 98016 2000
Elastic buckling of flat isotropic stiffened panels and struts in compression.
ESDU 96025 F 2010
Drag due to lift for non-planar swept wings up to high angles of attack at subsonic speeds
ESDU 81040 D 2004
The stability and response of linear systems. Part VII: examples.
ESDU 00020 2000
Guide to industrial water conservation. Part 1. Water re-use in single contaminant systems.
ESDU 16004 2019
Aerodynamics and aero-acoustics of rectangular planform cavities. Part V: Bibliography (up to 2016)
ESDU 05007 2007
Strain-life data for type 316 austenitic stainless steels at temperatures between -269 and 816 degrees C (-452 and 15...
ESDU 00035 E 2013
Aircraft Performance Program Part 5: Detailed input and output Program APP02
ESDU 20003 2019
Crack resistance curves
ESDU 98012 2001
Flexibility of, and load distribution in, multi-bolt lap joints subject to in-plane axial loads.
ESDU 07010 2007
Extrapolating wind-tunnel data to full-scale Reynolds number Part 2: Procedures
ESDU 00025 A 2014
Computer program for prediction of aircraft lateral stability derivatives in sideslip at subsonic speeds
ESDU 90009 1990
Fatigue of aluminium alloy joints with various fastener systems. Medium load transfer.
ESDU 94008 C 2010
Lubricant film thickness between disc cams and followers
ESDU 90026 B 1994
Inelastic bending moments, end loads, stresses and strains for beam sections of general polygonal shape.