What is BS 5173-106.2 - Methods of test for Rubber and plastics hoses and hose assemblies about?  
BS 5173-106.2 describes the method by which a sample of rubber hose is exposed to temperatures in excess of the prevailing normal atmospheric temperatures but within the upper-temperature limit specified in the relevant hose product specification, after which it is subjected to physical tests to establish the extent of deterioration.
NOTE The titles of the publications referred to in this standard are listed on the inside back cover.
Who is BS 5173-106.2- Methods of test for Rubber and plastics hoses and hose assemblies for?  
BS 5173 -106.2 on ageing test of rubber and plastic hoses and hoses assemblies is for:
- Rubber and plastic hoses manufacturers and suppliers   
- PVC hose pipe manufacturers and suppliers   
- Entities dealing with plastic hose assembly and hoses    
- Test providers for plastic and rubber hoses                                                               
Why should you use BS 5173-106.2 - Methods of test for Rubber and plastics hoses and hose assemblies? 
Rubber hoses are designed for specific fluid, temperature, and pressure ranges and are provided with various specifications.
BS 5173-106.2 provides a means of comparing the performance of hoses/hose assemblies after the hoses/hose assemblies are exposed to particular service conditions.
BS 5173-106.2 provides you with general requirements for high-temperature ageing tests of hoses and hose assemblies that help you to check whether they will withstand the differential pressure encountered in service resulting from reduced pressure within the hose or hose assembly. 
The test methodologies given in BS 5173-106.2 enable you to examine the hose for any signs of deformation or delamination of reinforcement or lining, which contributes a lot in maintaining the high quality and efficient functioning of rubber, and plastic hose, and hoses assemblies. 
