What is BS 5350-C13 - Methods of test for Adhesives about?
BS 5350-C13 describes a climbing drum peel test for the determination, under specified conditions, of the resistance of joints to perpendicular peel stresses on the adhesive layer.
BS 5350-C13 is applicable to the testing of joints between an outer metal sheet and the core of sandwich assemblies, e.g. honeycomb or other composites.
This test is intended for ranking and quality control of adhesives and not for obtaining data for design purposes.
Who is BS 5350-C13 - Methods of test for Adhesives for?
BS 5350-C13 on methods of test for adhesives is useful for:
- Manufacturers of adhesives
- The Adhesive industry
- Testing laboratories
- Chemical Engineers
Why should you use BS 5350-C13 - Methods of test for Adhesives?
The force required to separate progressively the two members of a bonded test piece of specified dimensions over the adhered surfaces, under the specified conditions of test. It is expressed in newtons.
BS 5350-C13 provides methods and procedures for determining the resistance of joints to perpendicular peel stresses on the adhesive layer using drum peel test. The test method outlined in BS 5350-C13 helps in increasing the life of adhesives at different climatic conditions.
BS 5350-C13 provides you with apparatus, sampling, transport, storage, and preparation of test joints, pre-treatment of test pieces, test procedure, and much more.
Using BS 5350-C13 you can get help in determining the bond strength and can manufacture superior quality adhesives.
