What is BS 5350-C6 - Methods of test for Adhesives about? 
BS 5350-C6 describes a procedure and mechanical test for determining the bond strength of a flat composite sandwich panel when subjected to a tensile force.
The method described in BS 5350-C6 is applicable to any type of adhesive over a wide range of test temperatures. It is also applicable to test pieces which have been subjected to one of a variety of environmental exposures before test. This test is intended for ranking and quality control of adhesives and not for obtaining data for design purposes.
NOTE The adhesive bond strength may be greater than the cohesive strength of either the core material or the facing panels, but the test may still provide useful information if the type of failure is taken into account.
Who is BS 5350-C6 - Methods of test for Adhesives for? 
BS 5350-C6 on Methods of test for Adhesives is useful for: 
- Manufacturers of adhesives
- The Adhesive industry 
- Testing laboratories 
- Chemical Engineers
Why should you use BS 5350-C6 - Methods of test for Adhesives? 
sandwich panel is an assembly made of a lightweight core to which sheet material has been bonded on both surfaces.
BS 5350-C6 provides methods and procedures for determining the bond strength in direct tension in sandwich panels. The test method outlined in BS 5350-C6 helps in increasing the life of adhesives at different climatic conditions.
BS 5350-C6 provides you with apparatus, sampling, transport, storage, and preparation of test joints, pre-treatment of test pieces, test procedure, and much more.
Using BS 5350-C6 you can get help in determining the bond strength and can manufacture superior quality adhesives.
