What is BS 6068-2.41 — Physical, chemical, and biochemical methods about? 
BS 6068-2.41 is the 41st section of the multi-series standard that specifies methods and procedures for the determination of fluoride content by the electrochemical probe method for portable and light-polluted water.
BS 6068-2.41 specifies a method for the determination of dissolved fluoride in fresh, potable, and low contaminated water, and some surface waters, using an electrochemical technique.
The method described in BS 6068-2.41 is directly suitable for measuring fluoride concentrations from0,2 mg/l to 2,0 g/l. After the addition of a known amount of fluoride, concentrations as low as 0,02 mg/l can be detected (see 7.3).
The method described in BS 6068-2.41 is not suitable for wastewaters and industrial effluents.
Who is BS 6068-2.41 — Physical, chemical, and biochemical methods for? 
BS 6068-2.41 on the Physical, chemical and biochemical methods are useful for: 
- Wastewater collecting systems 
- Wastewater treatment plants 
- Plants treating industrial wastewater 
- Water supply treatment plants  
Why should you use BS 6068-2.41— Physical, chemical, and biochemical methods?
Electrochemical methods remove and recover heavy metals based on the assumption that metals precipitate in their elemental form when a potential or electricity is applied to the solid electrodes
BS 6068-2.41 provides methods for characterizing water quality based on physical, chemical, and biochemical measures for determining the fluoride content in water using the electrochemical probe method.
BS 6068-2.41 provides you with apparatus, sampling, transport, storage, and preparation of test pieces, preparation of reagents and apparatus, pre-treatment of test pieces, test procedure, and much more.
The test methods and procedures provided by BS 6068-2.41 assist you in the determination of fluoride in the water and ensure reducing the risk of severe health issues.
With obedience and compliance to BS 6068-2.41, you can enhance the efficacy of the water and manufacture a standardized product.
