What is BS 6130-1 - Specifications of two basic types of metallic hose and hose assembly about?
BS 6130 is a series on hose and hose assemblies for asphalt and bitumen. Hose and hose assemblies are flexible hollow tubes designed to carry fluids from one location to another. BS 6130-1 specifies requirements for the design, manufacture, performance, testing and marking of two basic types of metallic hose and hose assembly for dockside, road and rail loading and unloading of asphalt and bitumen.
BS 6130-1 unloading of asphalt and bitumen. The standard covers nominal sizes DN 80 to DN 250 with working pressures of 5 bar and 12 bar.1). BS 6130-1 allows a number of options. Therefore, to assist the purchaser, a checklist of the options, together with the other information to be supplied in the enquiry and order is given in BS 6130-1.
Who is BS 6130-1 - Specifications of two basic types of metallic hose and hose assembly for?
BS 6130-1 on specifications of two basic types of metallic hose and hose assembly is useful for:
- Hose manufacturing industry
- Hose assembly manufacturers
- Design engineers
- Quality control personnel
Why should you use BS 6130-1 - Specifications of two basic types of metallic hose and hose assembly?
Hoses are also sometimes called pipes (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally tubing. The shape of a hose is usually cylindrical (having a circular cross-section). BS 6130-1 states that the manufacturer carries out the tests on each new design or design of the modified hose assembly and supplies a copy of the certificate to the purchaser if required. The test results, including the burst pressure, are stated on the certificate.
After manufacture, every hose assembly are subjected to a hydraulic pressure test during which there is no sign of leakage or of any other mode of failure. The test pressure is given in BS 6130-1. The test pressure is applied and maintained for a sufficient length of time to permit a visual examination of all surfaces and joints but in any case, for not less than 3 min. using BS 6130-1 you can understand the specifications of two basic types of metallic hose and hose assembly for dockside, road and rail loading and unloading of asphalt and bitumen.
