What is BS 6200-3.11.2 – Ferrous metals about?
BS 6200-3.11.2 standard is a part of the BS 6200 series that discusses the determination of cobalt in steel, iron and steelmaking materials using a spectrophotometric method for trace amounts for sampling and analysis of iron, steel and other ferrous metals. Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability.
BS 6200-3.11.2 describes a spectrophotometric method for the determination of trace amounts of cobalt in steel, iron, and steelmaking materials. The method is applicable to cobalt contents from0.002 % (m/m) to 0.04 % (m/m).
Who is BS 6200-3.11.2 – Ferrous metals for?
BS 6200-3.11.2 on spectrophotometric method for trace amount applies to:
- Manufacturer of steel and iron products
- Quality testing personnel
- Ferrous metals engineer
Why should you use BS 6200-3.11.2 – Ferrous metals?
Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability. Spectrophotometry is best used for the determination of one or more parameters on a routine basis. It provides an accurate, easy, quick and cheap method of analysis.
BS 6200-3.11.2 provides you with the blank test in which it determines the procedure, carry out a blank test using the same quantities of reagents. BS 6200-3.11.2 also provides the determination of cobalt in steel, iron and steelmaking materials which includes: preparation of the test solution, removal of chromium, zinc oxide separation of iron, separation of cobalt, development of the colour, compensating solution and spectrophotometric measurement. This helps you sample and analyzing of iron, steel and other ferrous metals.
With obedience and compliance to BS 6200-3.11.2, you can efficiently provide the spectrophotometric method for trace amounts for the sampling and analysis of iron, steel and other ferrous metals.
