What is BS 6200-3.26.2 – Ferrous metals about?
BS 6200-3.26.2 standard is a part of the BS 6200 series that discusses the determination of silicon for acid-resisting high silicon iron using the gravimetric method for sampling and analysis of iron, steel and other ferrous metals. Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability.
BS 6200-3.26.2 describes a gravimetric method for the determination of silicon in acid-resisting high silicon irons. The method is applicable to silicon contents from10 % (m/m) to 20 % (m/m).
Who is BS 6200-3.26.2 – Ferrous metals for?
BS 6200-3.26.2 on acid-resisting high silicon iron for gravimetric method applies to:
- Manufacturer of steel and iron products
- Quality testing personnel
- Ferrous metals engineer
Why should you use BS 6200-3.26.2 – Ferrous metals?
Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability. The gravimetric analysis relies on the contrast of the masses of two analyte-containing compounds. The idea behind gravimetric analysis is that it is possible to calculate the mass of an ion in a pure compound and then use it to calculate the mass percentage of the same ion in a specified volume of an impure compound.
BS 6200-3.26.2 provides you with the determination of silicon for acid-resisting high silicon iron that includes: the preparation of the test solution, first separation of silica, recovery of soluble silica, ignition and measurement of silica and the treatment of silicon carbide. This helps you in the sampling and analysis of iron, steel and other ferrous metals.
With obedience and compliance to BS 6200-3.26.2, you can efficiently provide the gravimetric method for the sampling and analysis of iron, steel and other ferrous metals.
