What is BS 6200-3.8.2 – Ferrous metals about?
BS 6200-3.8.2 standard is a part of the BS 6200 series that discusses the determination of carbon of steel and cast iron using a non-aqueous titrimetric method after combustion for sampling and analysis of iron, steel and other ferrous metals. Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability.
BS 6200-3.8.2 describes a non-aqueous titrimetric method for the determination of carbon in steel and cast iron. The method covers the range of carbon contents found in all types of steel, pig and cast iron and commercially pure iron.
Who is BS 6200-3.8.2 – Ferrous metals for?
BS 6200-3.8.2 on steel and cast iron applies to:
- Manufacturer of steel and iron products
- Quality testing personnel
- Ferrous metals engineer
Why should you use BS 6200-3.8.2 – Ferrous metals?
Ferrous metals such as cast and wrought iron or carbon steel are known for their tensile strength and durability. Non-aqueous titrations are the most titrimetric procedure used in pharmacopoeia assays and serve a double purpose, as it is suitable for the titration of weak acids and bases and provides a solvent in which organic compounds are soluble.
BS 6200-3.8.2 provides you with the procedure for the determination of carbon for steel and cast iron which includes: Test portion, blank test, determination, alternative combustion conditions, standardization. This helps you cover the range of carbon elements found in all types of steel, pig and cast iron by using the non-aqueous titrimetric method.
With obedience and compliance to BS 6200-3.8.2, you can efficiently provide the non-aqueous for the sampling and analysis of iron, steel and other ferrous metals.
