BS 7079:2009 General introduction to standards for preparation of steel substrates before application of paints and related products
The performance of protective coatings of paint and related products applied to steel is significantly affected by the state of the steel surface immediately prior to painting.
If you are responsible for the preparation of steel prior to painting, then BS 7079 will be of interest.
The standard will be of use to contractors, specifiers and inspectors in a range of industries, who are responsible for defining the degree of surface preparation required by high pressure water jetting, including marine, bridges, chemical plants, refineries, and civil engineering.
BS 7079 gives you a general introduction to all the British standards for steel surface preparation. It gives general information on all the separate groups of standards, along with a complete listing of all the published standards that cover abrasive blast-cleaning, hand- and power-tool cleaning and flame cleaning of steel substrates.
It gives general information on all the separate groups of standards, along with a complete listing of all the published standards that cover abrasive blast-cleaning, hand- and power-tool cleaning and flame cleaning of steel substrates.
BS 7079 also includes definitions that apply to all the standards listed. Additional definitions, specific to certain processes, are given in the respective standards. To help the user, all of the ‘older’ BS 7079 references are given so that the new and/or updated standards can easily be found, as (although some remain dual-numbered) many are now only known by their BS EN ISO reference.
Although the surface preparation standards are primarily intended for use with hot-rolled steel, abrasive blast-cleaning methods, in particular, might also be applicable to the surface preparation of cold-rolled steel of sufficient thickness to withstand any deformation caused by the impact of the abrasive. The standards are not applicable to non-ferrous substrates such as aluminium or galvanized or electroplated steel.
BS EN ISO 4618:2006 Paints and varnishes. Terms and definitions is indispensable for the application of BS 7079.
Contents of BS 7079 contain:
- Scope
- Normative references
- Terms and definitions
- List of standards
- Further information
- Bibliography
- List of tables
BS 7079:2009 replaces BS 7079-0:1990 which has been withdrawn
