What is BS 9070-3 - Test methods for Tantalum electrolytic capacitors about?
BS 9070-3 is the third part of a multi-series standard used for Fixed capacitors of assessed quality that specifies the test methods and procedure for Tantalum electrolytic capacitors. This helps in producing good quality Tantalum electrolytic capacitors.
BS 9070-3 applies to the tantalum electrolytic capacitors listed below, for use in equipment
for telecommunication and in electronic devices employing similar techniques:
- Plain foil, liquid electrolyte
- Etched foil, liquid electrolyte
- Sintered anode, liquid electrolyte
- Sintered anode, solid electrolyte
Who is BS 9070-3 - Test methods for Tantalum electrolytic capacitors for?
BS 9070-3 on Tantalum electrolytic capacitors is useful for:
- Manufacturer of electronic components
- Manufacturer of automotive parts
- Defence
- Aerospace
- Electronic engineer
Why should you use BS 9070-3 - Test methods for Tantalum electrolytic capacitors?
A tantalum electrolytic capacitor is an electrolytic capacitor, a passive component of electronic circuits.
BS 9070-3 specifies electrical, mechanical, and environmental test methods and test procedures for tantalum electrolytic capacitors. The dimension and gauging procedure are useful in designing and constructing these capacitors. With the help of visual examination, you can identify the defects and failures of these fixed capacitors. By applying BS 9070-3, you can ensure the sustainability of these capacitors in different climatic conditions. That results in manufacturing good quality tantalum electrolytic capacitors.
