What is BS 9210 N0009-2 - Mating face details for series SMC about?
BS 9210 N0009 is a series on detail specifications for radio frequency connectors (series SMC). A radio frequency connector is an electrical connector designed to work at radio frequencies in the multi-megahertz range.
BS 9210 N0009-2 specifies control drawings of unsealed, soldered, captive contact, 50 ohms, screw coupling connector set and also provides specifications on mating face details and gauge information.
Who is BS 9210 N0009-2 - Mating face details for series SMC for?
BS 9210 N0009-2 on mating face details for series SMC is useful for:
- Telecommunication component manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
Why should you use BS 9210 N0009-2 - Mating face details for series SMC?
Radiofrequency connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers. Better models also minimize the change in transmission line impedance at the connection in order to reduce signal reflection and power loss. BS 9210 N0009-2 illustrates control drawings of Mating face details Male centre contact (XX-02 Styles), Mating face details — Female centre contact (XX-03 Styles), and Compatibility gauge information to inspect the mating face of connectors with Male centre contact (XX-02 Styles).
BS 9210 N0009-2 also illustrates the drawings of Compatibility gauge information to inspect the mating face of connectors with Female centre contact (XX-03 Styles) and Sizing and retention gauges for SMC connectors —Resilient contacts. The dimensions which are in millimetres are derived from the original inch dimensions, third angle projection is used where projected views and dimensioning of a radiofrequency connector are specified in BS 9210 N0009-2. Using BS 9210 N0009-2 you can specify mating face details and gauge information through control drawings of the radiofrequency connector set.
