What is BS EN 10028‑3 - Weldable fine grain steels about?
BS EN 10028 is a series of European standards on flat products made of steel for pressure purposes that discusses the best procedures and specifications on manufacturing high-quality sheets and plates from weldable fine grain steels for the construction of safe pressure equipment. BS EN 10028-3 is the third part of a series of documents on flat products made of steel for pressure purposes.
BS EN 10028‑3 specifies requirements for flat products for pressure equipment made of weldable fine grain steels.
The requirements and definitions of EN 10028-1:2017 also apply.
NOTE 1: Fine grain steels are understood as steels with a ferritic grain size of 6 or finer when tested in accordance with EN ISO 643.
NOTE 2: Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, the presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.
Who is BS EN 10028‑3 - Weldable fine grain steels for?
BS EN 10028-3 on flat products made of steels for pressure purposes is relevant to:
- Manufacturer of weldable fine grain steels products
- Manufacturer of pressure appliance
Why should you use BS EN 10028‑3 - Weldable fine grain steels?
Fine-grain steels have good cold formability and toughness. They have a fine grain structure due to the low carbon content and micro-alloying elements.
BS EN 10028‑3 navigates you through the tolerances on dimensions, classification of the steel grades, calculation of mass, chemical properties, mechanical properties, test methods.
BS EN 10028-3 exemplifies the required chemical composition and mechanical properties that help you achieve precision in terms of product functionality and specification.
As a user of BS EN 10028-3, you can be ensured of all the requirements for flat products made of weldable fine grain steels for pressure purposes. With obedience and compliance to BS EN 10028-3, you can efficiently manufacture high-quality flat products for pressure equipment made of weldable fine grain steels. With BS EN 10028-3 you can be ensured that the products consistently meet and exceed quality assurance targets. BS EN 10028-3 provides you with comprehensive information useful throughout the process of production.
What’s changed since the last update?
BS EN 10028‑3:2017 supersedes BS EN 10028-3:2009, which is withdrawn.
- The option to agree thicknesses greater than those stated in the standard and the corresponding footnotes in the Tables 4 and 5 have been deleted
- EN 1011-1 and EN 1011-2 have been moved from the bibliography to the normative references
- The steel grades P420NH, P420NL1, and P420NL2 with the corresponding data have been included in the standard
- The marking of text passages with one or two dots has been deleted, the cross-references in the standard have been updated
- The note in sub-clause 8.2.3 concerning delivery condition has been removed
- The possibility for normalizing rolling has been extended to all grades
- Chemical analysis and mechanical properties for P460 > 100 mm were defined
- A new Option 13 for limited Cu, Sn-contents was defined
- The information on weldability and the note in 8.2.4 was moved to Annex B
