BS EN 10251:2024

Magnetic materials. Methods of determination of the geometrical characteristics of electrical steel sheet and strip. | Status: Current

1 Scope This document is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:

• — edge wave;
• — residual curvature;
• — edge camber;
• — deviation from the shearing line due to internal stresses;
• — burr height of cut edges.

This document applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21, C22 and C23 of EN 60404‑1:2017.