What is BS EN 10372 about?
BS EN 10372 specifies a method using a barcoding system for tracing isolated defects that can be present in the following kinds of coated or uncoated steel flat products, for example:
- Electro-galvanised surface
- Galvanised surface
- Galvannealed surface
- Cold rolled surface
This method, named “quality tracking”, aims to transfer additional material information to steel users, in particular the location of some isolated defects, in a reliable way. This method enables the manufacturer or purchaser to remove blanks or coils containing defects.
The method uses a 1D barcode to identify each section of the steel strip.
NOTE 1: The stakeholders most involved in this technique are suppliers of steel flat products, carmakers, appliance makers, part manufacturers, blanking line builders, steel processors, service centres, etc. All stakeholders can benefit from this project since defects can be traced, and, therefore, the steel containing defects can be eliminated or set apart from the production line.
NOTE 2: In the first stages of development, this method was called “defect tracking” and has been changed into “quality tracking” at the beginning of the standardization process.
NOTE 3: Quality tracking can be applied to other types of coated or uncoated steel flat products such as pickled and oiled, organic coated, and steels for packaging. Quality tracking can be applied to coiled materials for which the technology of quality tracking is applicable.
NOTE 4: If quality tracking data are used outside of the purpose of quality tracking, it is under the responsibility of the user. Quality tracking can be applied to other materials than steel.
NOTE 5: The way to collect the information to be transferred to the user is out of the scope of BS EN 10372.
Who is BS EN 10372 for?
BS EN 10372 on quality tracking system for flat steel products using barcode is relevant to:
- Steel manufacturers
- Automobile industries
- Service centres
- Suppliers
Why should you use BS EN 10372?
BS EN 10372 provide information on the 1D barcode, Compact data carrier (CDC), Transfer of the compact data carrier to the user, Barcode reading unit (BRU), Information to be supplied by the steel user, Verification of the printed 1D barcode, Reporting of the results
As a user of BS EN 10372, you get information on quality tracking using barcode this helps you to reduce data-entry errors, Decrease inspection time, Increase traceability so that you can track the quality of every product. BS EN 10372 makes doing business much more efficient for companies.
Overall BS EN 10372 assists the user in quality tracking of products and helps him to grow his business.
