What is BS EN 124-5 - gully and manhole tops about?  
Mitigating risks around manholes for pedestrians and commuters is a top priority. BS EN 124-5 is a European Standard that serves technical specifications for gully tops and manhole tops, ensuring structural integrity and safety in vehicular and pedestrian applications.
The BS EN 124-5 series focuses on gully tops and manhole tops for vehicular and pedestrian areas to fulfill their appropriate requirements.
BS EN 124-5 is the fifth part of the multi-series that is applicable to manhole tops and gully tops made of composite materials C1, C2, and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
- Areas which can only be used by pedestrians and pedal cyclists (class A 15),
- Pedestrian areas and comparable areas, car parks or car parking decks (class B 125),
- The area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250), and in addition to manhole tops for use in
- Carriageways of roads (including pedestrian streets), hard shoulders, and parking areas, for all types of road vehicles (class D 400).
Note: BS EN 124-5 is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of composite materials with frames according to EN 124-2, EN 124-3, EN 124-4, or EN 124-6.
Note: BS EN 124-5 is not applicable to:
- Manhole tops and gully tops manufactured by means of hand lay-up method
- Gratings/covers as part of prefabricated drainage channels according to EN 1433
- Floor and roof gullies in buildings which are specified in EN 1253 (all parts)
- Surface boxes
Who is BS EN 124-5 - gully and manhole tops for? 
BS EN 124-5 on gully tops and manhole tops for vehicular and pedestrian areas is useful for: 
- Manufacturers and suppliers of gully and manhole tops
- Product design teams / innovation teams
- Civil engineers / project managers
- Relevant government / municipal bodies
- Local and national roadways authorities
- Safety regulatory bodies
Why should you use BS EN 124-5 - gully and manhole tops?  
Gully tops and manhole tops develop leaks as a result of heavy traffic and from freezing and thawing, causing sanitary overflow problems and expensive repairs. In repairing these manholes, crews face the challenges of sealing or otherwise repairing the chimney.
Composite materials in accordance with BS EN 124-5 consist of a reinforcing fiber encapsulated within a thermoset matrix resin and moulded as a single structure ensuring strength, lightweight, corrosion resistance, design flexibility, and durability.
BS EN 124-5 provides users guidance on materials, design, performance, testing, assessment, and verification of constancy of performance, designation, and marking, enabling the standardization and development of gully and manhole tops.
BS EN 124-5 provides users guidance on design and performance requirements, reaction to fire, the effect of heating, deflection under load, impact resistance, durability, and dangerous substances, ensuring safety and protection in vehicular and pedestrian areas.
BS EN 124-5 guidelines enable you to design, manufacture and test iron gully and manhole tops, ensuring safety, usability, and longevity in vehicular and pedestrian areas.
