What is BS EN 13126-3 - Requirements of Tilt&Turn, Tilt- First and Turn-Only handles about?
BS EN 13126 is a European Standard on building hardware for windows and door height windows.
It is a multipart product standard which enables the testing of hardware components or sets.
The main aim of the BS EN 13126 series is to help manufacturers of hardware for windows and door height windows demonstrate the performance and reliability of their products.
BS EN 13126-3 is the third part of the BS EN 13126 series that specifies the requirements and test procedures for durability, strength, security and functionality of handles.
BS EN 13126-3 is applicable to Tilt&Turn, Tilt-First and Turn-Only hardware for use on windows and door height windows.
Handles may also be used on other opening types, e.g., on In-line Sliding, Tilt&Slide, Fold&Slide, horizontal and vertical-pivoting windows.
Note: BS EN 13126-3 is not applicable to the following hardware:
- Operation devices and door handles for door latches and door locks (refer to EN 1906)
- Handles with handle length > 170 mm (refer to Figure B.1)
- Electromechanical hardware.
Who is BS EN 13126-3 - Requirements of Tilt&Turn, Tilt- First and Turn-Only handles for?
BS EN 13126-3 on windows and door height windows is useful for:
- Manufacturers of building hardware accessories
- Manufacturers of Tilt&Turn, Tilt- First and Turn-Only handles
- Product designers
- Interior designers
- Quality control and testing personnel
- Installers
Why should you use BS EN 13126-3 - Requirements of Tilt&Turn, Tilt-First and Turn-Only handles?
Handles are essential for opening and closing doors and windows. The type of handle and locking mechanism chosen will depend on the application and the level of security required.
BS EN 13126-3 provides a classification system for handles based on parameters such as security, corrosion, durability, fire-resistance, application and safety in use.
BS EN 13126-3 also covers test methods that can demonstrate whether your handles are fit for purpose.
As a result, if you are a manufacturer of Tilt&Turn, Tilt-First and Turn-Only handles, adopting BS EN 13126-3 requirements and test methods can ensure your products are durable, reliable and effective at the point of use.
