What is BS EN 13146-10 - Test methods for fastening systems about ?
BS EN 13146-10 focuses on railway applications. BS EN 13146-10 specifies a test procedure to confirm that the force necessary to pull the anchorage of a rail fastening assembly out of the sleeper or other supporting element is greater than a prescribed value (i.e., it is a 'proof load' test).
This test is for components of the fastening system which are:
- Cast into concrete during the manufacture of sleepers or other supporting elements
- Glued into the cast or drilled holes in concrete or
- Screwed or otherwise attached to wood, plastic or steel sleepers or other supporting elements
Note: BS EN 13146-10 is not applicable to embedded rails.
Who is BS EN 13146-10 - Test methods for fastening systems for ?
BS EN 13146-10 on proof load test for pull-out resistance is useful for:
- Designer and producers of rail fastening systems
- Railway management authorities 
- Infrastructure managers
- Site supervisors 
- Inspection and testing department in railways  
- Train operator companies (TOCs) 
Why should you use BS EN 13146-10 - Test methods for fastening systems ?
The main function of rail fastening systems is to fix rails to railway sleeper or railroad ties.
BS EN 13146-10 specifies proof load test for pull-out resistance to ensure rail fastening assembly can withstand the design load without failure or unacceptable deformation.
If you are a manufacturer of fastening systems, BS EN 13146-10 can ensure your products are safe and reliable.
Overall, compliance to the proof load test method for pull-out resistance suggested by BS EN 13146-10 can help you evaluate the dynamic fatigue strength and holding forces that ensure the operational safety of railway networks while protecting the rail against tilting.
