What is BS EN 14308 - Thermal insulation with factory made PUR and PIR products about?
BS EN 14308 is a European Standard that discusses thermal insulation products for buildings. The main aim of the BS EN 14308 series is to provide manufacturers with best industry practices to demonstrate the performance of thermal insulation products, such that they are fit for its intended use.
BS EN 14308 specifies the requirements for factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products, with a closed-cell content not less than 90 %, with or without facings, which are used for the thermal insulation of building equipment and industrial installations, with an operating temperature range of approximately, - 200 °C to + 200 °C.
The products are manufactured in the form of blocks, faced or unfaced boards, pipe sections, segments and prefabricated ware.
Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.
Note 1: BS EN 14308 does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations and invitations to tender.
Note 2: Products with a declared thermal conductivity greater than 0,100 W/(m·K) at 10 °C are not covered by BS EN 14308.
Note 3: BS EN 14308 does not cover products for in situ-insulation (spraying or dispensing) or products for the insulation of the building structure.
Note 4: BS EN 14308 does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index.
Who is BS EN 14308 - Thermal insulation with factory made PUR and PIR products for?
BS EN 14308 on thermal insulation products is relevant to:
- Builders
- Thermal and sound insulating material manufacturers
- PUR and PIR manufacturers and suppliers
- Contractors
- Building owners
- Specifiers and installers
Why should you use BS EN 14308 - Thermal insulation with factory made PUR and PIR products?
Rigid polyurethane foam (PUR/PIR) is one of the most efficient, high-performance insulation material, that contributes toward energy savings while occupying the least amount of space, ensuring high stability, and having exceptional thermal resistance and dimensional stability.
BS EN 14308 provides the best industry recommendations on product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling of PUR and PIR products.
The classes of dimensional tolerances are specified in BS EN 14308 giving measures of length and width, thickness, squareness and flatness.
BS EN 14308 also covers guidance on Assessment and Verification of the Constancy of Performance (AVCP) that ensures your products conform with the requirements.
Thus, if you are a manufacturer of factory made PUR and PIR for thermal insulation, complying with BS EN 14308 can help demonstrate the performance and credibility of your product, ensuring that they are fit for purpose.
What’s changed since the last update?
BS EN 14308:2015 supersedes EN 14308:2009+A1:2013. BS EN 14308:2015 includes some technical changes with respect to EN 14308:2009+A1:2013. These include:
- An addition to the foreword
- An addition and modification of clauses
