What is BS EN 14316-1 - Specification for bonded and loose-fill thermal insulation products about?
The quality and performance of thermal insulation products are critical when it comes to achieving operational energy efficiency in buildings, as they can effectively minimize heat loss and heat gain, as per the external weather conditions.
BS EN 14316-1 is a European Standard that discusses thermal insulation products for buildings. The main aim of the BS EN 14316-1 series is to provide manufacturers with best industry practices to demonstrate the performance of thermal insulation products, such that they are fit for its intended use.
BS EN 14316-1 is the first part of the BS EN 14316 series that specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by annex D for in-situ insulation of roofs, ceilings, walls and floors.
BS EN 14316-1 is a specification for the insulation products before installation.
Note 1: BS EN 14316-1 does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
Note 2: BS EN 14316-1 does not cover factory made insulation products of formed shapes and boards made with expanded perlite or in-situ products intended to be used for the insulation of building equipment and industrial installations.
Note 3: BS EN 14316-1 does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
Who is BS EN 14316-1 - Specification for bonded and loose-fill thermal insulation products for?
BS EN 14316-1 on specification for bonded and loose-fill thermal insulation products is useful for:
- Thermal and sound insulating material manufacturers
- EP products manufacturers
- Contractors
- Civil engineers
- Consultancies for thermal insulation
- Specifiers and installers
- Quality control and testing personnel
Why should you use BS EN 14316-1 - Specification for bonded and loose-fill thermal insulation products?
Expanded perlite is a lightweight granular (insulation) material manufactured from naturally occurring volcanic rock expanded by heat to form a cellular structure. The main purpose of EP products is to offer effective thermal insulation to buildings by reducing heat transmission.
In this regard, BS EN 14316-1 describes the product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling of EP products.
Thus, if you are a manufacturer of EP products for thermal insulation, complying with BS EN 14316-1 can help demonstrate the performance and credibility of your product, ensuring that they are fit for purpose.
