What is BS EN 14354 — Wood veneer floor coverings about?
BS EN 14354 discusses wood-based panels. This European standard defines terms and specifies requirements and test methods for wood veneer floor coverings with multilayer built up for internal use. BS EN 14354 gives guidance for the evaluation of conformity of the products to its requirements.
Note: BS EN 14354 is not applicable to multilayer parquet elements with a minimum top layer thickness of 2,5 mm. For these products, EN 13489 applies.
Who is BS EN 14354 — Wood veneer floor coverings for?
BS EN 14354 on wood veneer floor coverings is useful for:
- Wood flooring and laminates companies
- Architects
- Interior designers
- Carpenters
Why should you use BS EN 14354 — Wood veneer floor coverings?
Wood veneer floor coverings are widely used flooring solutions for commercial and domestic settings. These coverings need to withstand humidity changes inside the building and also be resistant to abrasion. Wood veneer floor coverings that do not meet these requirements have a short operational lifecycle and are considered inferior quality products.
BS EN 14354 helps you to meet the general requirements for wood veneer floor coverings by classifying these requirements and designating test methods to verify them.
Overall, the test methods described in BS EN 14354 help you to verify and meet the physical and quality requirements for wood veneer floor coverings thereby effectively improving their quality.
What’s changed since the last update?
BS EN 14354:2017 supersedes EN 14354:2004. Compared to EN 14354:2004 the following modifications have been made in BS EN 14354:2017:
- Definitions of lacquered and oiled surfaces were introduced
- Deletion of requirements on humidity variations as in 4.3
- Modifications of classification on wear resistance in Table 2 with two methods of testing
- Requirement for the locking strength in Table 2 for the classes 32 and 33
- Modified test method for abrasion resistance in Annex D
