What is BS EN 14960-2 about?
BS EN 14960-2 discuss the safety of inflatable play equipment BS EN 14960-2 specifies additional safety requirements for inflatable bouncing pillows intended for permanent installation.
BS EN 14960-2 specifies safety requirements for inflatable play equipment for which the primary activity is bouncing.
BS EN 14960-2 sets measures to address risks and also to minimize accidents to users for those involved in the design, manufacture, and supply of inflatable play equipment.
BS EN 14960-2 specifies information to be supplied with the equipment. The requirements have been laid down bearing in mind the risk factor based on available data.
BS EN 14960-2 specifies the requirements that will protect a child from hazards that he or she might be unable to foresee when using the equipment as intended, or in a manner that can be reasonably anticipated.
Note1: BS EN 14960-2 is applicable to inflatable play equipment intended for use by children fourteen years and under, both individually and collectively.
Note2: BS EN 14960-2 is not applicable to inflatables dealt with in EN 14960-1:2019, inflatable waterborne play and leisure equipment, domestic inflatable toys, air-supported buildings, inflatables used solely for protection, inflatables used for rescue, or other types of inflatable toys where the primary activity is not bouncing or sliding.
Who is BS EN 14960-2 for?
BS EN 14960-2 on safety requirements for inflatable bouncing pillows is useful for:
- Inflatable bouncing pillows manufacturers
- Inflatable bouncing pillows installers
- Quality control laboratories
- Safety regulatory bodies
Why should you use BS EN 14960-2?
The inflatable play equipment referred to in BS EN 14960-2 provides various levels of challenge and excitement. BS EN 14960-2 aims to minimize the level of risk and the possibility of acute injury while allowing children to enjoy themselves when playing in or on inflatable equipment.
BS EN 14960-2 provides the safety requirements for inflatable bouncing pillows, that will protect a child from hazards that he or she may be unable to foresee when using the equipment as intended, or in a manner that can be anticipated.
BS EN 14960-2 set safety requirements for inflatable bouncing pillows intended for permanent installation, to address risks and minimize accidents for users for those involved in the design, manufacture, and supply of inflatable play equipment, which helps you during the manufacturing and designing of inflatable bouncing pillows with considering the safety of users or children.
What’s changed since the last update?
BS EN 14960-2:2019 supersedes BS EN 14960:2013. BS EN 14960-2:2019 includes some technical changes with respect to BS EN 14960:2013. These include:
- Split into standard series with three parts
- Requirements completely revised
- Test methods completely revised
- Editorially updated
