BS EN 15828:2010

Hardware for furniture. Strength and durability of hinges and their components. Stays and hinges pivoting on a horizontal axis. | Status: Current, Confirmed

1 Scope This European Standard specifies test methods and requirements for the strength and durability of all hinges, stays and systems which include hinges and stays pivoting on a horizontal axis and their components for all fields of application. It does not apply to systems intended for storage functions. This standard does not apply to electrically actuated systems. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the hinges and the parts used for the attachment, e.g. mounting plates and screws. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the hinges tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. With the exception of corrosion, ageing and the influence of heat and humidity are not included. Annex A (normative): requirements for product information. Annex B (normative): loads and cycles.