What is BS EN 15869‑2- On-shore unit of inland navigation vessels about?
BS EN 15869 is European Standard that discusses inland navigation vessels and their related electrical shore connections.
BS EN 15869‑2 is the second part of the multi-series that applies in connection with EN 15869-1 for the supply of berthed inland navigation vessels with electrical energy.
BS EN 15869‑2 specifies additional requirements for the on-shore unit of the electrical shore connection.
Who is BS EN 15869‑2- On-shore unit of inland navigation vessels for?
BS EN 15869‑2 on inland navigation vessels is useful for:
- Manufacturers of electrical equipment of ships and of marine structures
- Vessel/barge operators
- Inland water transport sector
- Companies involved in construction of waterways, ports and dykes
- Inland waterway transport authorities
- Marine and shipbuilding industry
- Electrical engineers
Why should you use BS EN 15869‑2- On-shore unit of inland navigation vessels?
Inland navigation vessels are equipped with a variety of electrical loads operating at 230 V or 400 V. While underway, a continuous electrical power supply is provided by the onboard system from
generators driven by diesel engines.
When the vessel is berthed, these generators remain in operation if there is no suitable onshore power supply available. In some cases, this leads to intense noise pollution both for the crew on the vessel itself and on other vessels lying alongside and also for residents ashore. The exhaust fumes are an additional pollution factor.
The electrical shore connections specified in BS EN 15869‑2 make it possible to provide the vessels with an electrical power supply while berthed and to eliminate noise and exhaust pollution. BS EN 15869‑2 calls for a uniform Europe-wide shore connection that can be activated and deactivated by the vessel's crew in all ports and berths, if possible, without requiring any assistance from shore-based personnel.
BS EN 15869‑2 contains electrical safety requirements for the prevention of hazards in making, using, and breaking the shore connection.
What’s changed since the last update?
BS EN 15869‑2:2019 supersedes BS EN 15869‑2:2010, which is withdrawn. The main changes compared to the previous edition are as follows:
- The maximum operating current is increased up to 125 A and title has been changed
- Clause 4 has been renamed "Requirements" and divided into four sub-clause
- Clause 4.5 “Operating instructions” has been added and aligned with requirements of EN 1684
- Requirements for documentation and instructions for use have been added
- Figures have been improved
- Former Clause 7 “Manufacturer’s declaration of conformity” has been removed
