What is BS EN 1621-4-Requirements and test methods for motorcyclists' inflatable protectors about?
BS EN 1621 is a European standard on motorcyclists' protective clothing against the mechanical impact that discusses the motorcyclists' inflatable protectors to ensure the protection of motorcyclists against mechanical impact.
BS EN 1621-4 is the fourth part in the BS EN 1621 series that covers requirements and test methods for mechanically activated inflatable protectors for motorcycle riders.
BS EN 1621-4 specifies the minimum level of protection, the minimum intervention time of inflated bag, and the minimum coverage to be provided by motorcyclists' protectors worn by riders.
The requirements of BS EN 1621-4 are applicable to the various design of inflatable protectors and refer to all body areas and their combinations that are claimed to be protected.
Inflatable protectors covered by BS EN 1621-4 may be incorporated in motorcycle garments or equipped with by appropriate restraint systems and worn on their own.
Note: Inflatable protectors other than mechanically activated are not covered under BS EN 1621-4.
Who is BS EN 1621-4-Requirements and test methods for motorcyclists' inflatable protectors for?
BS EN 1621-4 on the requirements and test methods for motorcyclists' inflatable protectors is useful for:
- Motorcyclists' inflatable protector manufacturers
- Motorcyclists' inflatable protector designers
- Motorcyclists' inflatable protector testers and developers
- Occupational safety and health departments
- Quality assurance departments
Why should you use BS EN 1621-4-Requirements and test methods for motorcyclists' inflatable protectors?
Motorcyclists' inflatable protectors are devices either embedded within or worn on top of other clothing, which aim to reduce the severity of injuries in case of motorcycle accidents.
BS EN 1621-4 provides you with guidance on the requirements for the performance of the system during an accident and details of the test methods, requirements for sizing, ergonomics, innocuousness, labelling and the provision of information.
The performance requirements and test methods under BS EN 1621-4 provide the best practical compromise between protection, comfort, and ergonomic requirements and ensure reduction in the severity of injuries caused by impacts.
With obedience and compliance to BS EN 1621-4, you can enhance the efficacy, quality and performance of motorcyclists' inflatable protector and manufacture a standardized high-quality product.
