What is BS EN 16474 - Tyre curing machines about?
BS EN 16474 is a British standard used for plastics, and rubber machines that specifies the safety requirements for tyre curing machines. By adopting BS EN 16474 you can ensure the safety of your employees while using these machines.
BS EN 16474 applies to tyre curing machines having the following configuration:
- Crossing flow tyre curing machines, with two cavities with:
- Common curing cycle, and common safeguarding; or
- Independent curing cycles, and common safeguarding; or
- Independent curing cycles, and independent safeguarding
- Tyre curing machines with one cavity
- Tyre curing machines with automatic rear feeding, and discharge
Note: BS EN 16474 does not deal with:
- Feeding system, and discharge system
- Tyre curing machines with manual loading of the green tyre into the mould, and manual unloading of the cured tyre from the mould
- Ancillary equipment which is not an integral part of the tyre curing machine, e.g. conveying equipment
- Exhaust systems
BS EN 16474 deals with all significant hazards, hazardous situations, and events relevant to tyre curing machines, when they are used as intended, and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). BS EN 16474 does not deal with hazards associated with the falling of parts of the container or mould.
Who is BS EN 16474 - Tyre curing machines for?
BS EN 16474 on plastics, and rubber machines are useful for:
- Manufacturers of automobile
- Research laboratories
- Engineers
Why should you use BS EN 16474 - Tyre curing machines?
Curing is the process that is useful in applying the pressure to the green tire in a mould to give it its final shape. This is also helpful in applying heat energy to stimulate the chemical reaction between the rubber compounds, and other materials.
By using BS EN 16474 you can identify the hazardous situations or events while working on these tyre curing machines. This is helpful in understanding the safety requirements to be undertaken by the manufacturers while using these machines. With the help of BS EN 16474, you can verify the safety requirements corresponding to these hazards by using the verification method. Applying BS EN 16474 you can ensure the safety of your employees by providing the instruction handbook while using these machines.
