BS EN 16482:2024

Founding. Continuous cast iron bars. | Status: Current

1 Scope This document specifies the grades of grey cast iron and spheroidal graphite cast iron bars, which have been produced by the continuous casting process. This document specifies the characterizing properties of grey cast iron bars by either:

1. a) the tensile strength measured on machined test pieces prepared from samples cut from the bars, or
2. b) the hardness measured on the bars.

If agreed by the manufacturer and the purchaser, the combination of both tensile strength from option a) and hardness from option b) can be specified. This document specifies the characterizing properties of spheroidal graphite cast iron bars by the tensile strength measured on machined test pieces prepared from samples cut from the bars. This document specifies 4 grades of grey cast iron and 14 grades of spheroidal graphite cast iron by a classification based on tensile strength and 4 grades of grey cast iron by a classification based on Brinell hardness. This document specifies also the straightness of the bars. This document does not cover technical delivery conditions for iron castings (see EN 1559‑1 and EN 1559‑3).