What is BS EN 16586-1 - Steps for access and egress for PRM about?
BS EN 16586 discusses the design for persons with reduced mobility (PRM) use in railway applications. BS EN 16586-1 is the first part of a multi-part series that layout the specific ‘Design for PRM use’ requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard:
- The definitions and requirements describe specific aspects of ‘Design for PRM use’ required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI
- BS EN 16586-1 defines elements that are universally valid for obstacle-free traveling including lighting, contrast, tactile feedback, the transmission of visual and acoustic information. The definitions and requirements of BS EN 16586-1 cover the infrastructure and rolling stock applications.
- BS EN 16586-1 only refers to aspects of accessibility for PRM passengers it does not define non-PRM related requirements and definitions
- BS EN 16586-1 assumes that the infrastructure or rolling stock is in its defined operating condition
- Where minimum or maximum dimensions are quoted these are absolute, not nominal requirements
BS EN 16586-1 guides on steps for access and egress for persons with reduced mobility (PRM) use.
Who is BS EN 16586-1 - Steps for access and egress for PRM for?
BS EN 16586-1 on steps for access and egress for PRM use is useful for:
- Regulatory authorities
- Personnel or staff authorized for access and egress for PRM
Why should you use BS EN 16586-1 - Steps for access and egress for PRM?
Access and egress routes need to be marked out, well lit, unobstructed, and well maintained if they are to allow personnel and others on-site to the site to access and exit quickly in an event of an emergency. These routes should never be blocked by stores, equipment, etc., or become hazardous due to poor housekeeping standards.
BS EN 16586-1 guideline assists you with general requirements and assessments on step position for vehicle access and egress, calculations for step location, step nose, EC verification, and testing requirements for steps for access and egress for persons with reduced mobility (PRM) use.
This assists in creating an appropriate step for access and egress for persons with reduced mobility (PRM) use that ensures the safety of passengers at time emergencies.
