What is BS EN 16759 about?
BS EN 16759 specifies the method to be used to verify the mechanical performance of the bonded glazing for doors, windows and curtain walling and its durability. The bonding covered is only that between the glass and the untreated, treated or coated metal surface.
BS EN 16759 gives you information to comply with requirements regarding design, factory production control and assembly rules.
The parts concerned in the testing are the metal surface (anodized and coated aluminium, stainless steel), the surface of glass, provided or not, with a layer or coating, which shall be bonded, the bonding sealant and mechanical restraints when required.
Note: BS EN 16759 does not apply to:
- Other surfaces materials
- Direct glazing;
- Glass-to-glass bonding and edge seal of insulating glass units
- Adhesive tapes
Who is BS EN 16759 for?
BS EN 16759 on the mechanical performance of bonding on aluminium and steel surfaces of doors, windows and curtain walling is applicable to:
- Bonded glazing manufacturer
- Mechanical engineers
- Manufacturers and designers of doors, windows and curtain walling
- Suppliers of bonding sealant
- Installers
Why should you use BS EN 16759?
Bonded glazing is a strong chemical connection between a glass unit and a structure, frame or other unit of glass. It is most often used in frameless or very minimal glass installations. Boded glazing is crucial to make sure that the bonding done to doors, windows and curtain walling is very strong as it is widely used in our surroundings and safety must be ensured in such areas.
With BS EN 16759, you will be able to assess bond strength, resistance of the bonding against moisture and durability of the bond strength, for bonding sealant.
BS EN 16759 gives information to the manufacturer to comply with requirements regarding design, factory production control and assembly rules.
BS EN 16759 helps you verify the mechanical performance and durability of bonding on aluminium and steel surfaces ensuring maximum safety for occupants
