What is BS EN 17092-3 about?
BS EN 17092-3 is the third part of a series of European standards on protective garments for motorcycle riders.
BS EN 17092-3 specifies general requirements for motorcyclists’ protective garments of Class AA: protective garments, which are intended to provide limited protection to the wearer against abrasion and impact injury. It applies to protective garments for motorcycle on-road use.
BS EN 17092-3 define the basic performance requirements considered essential for motorcyclists’ protective garments, for them to offer useful classes of protection to riders according to the risks they may encounter, during various riding activities and in various riding environments.
Note: Class AA garments. offer protection from impact and abrasion, using materials and construction that meet higher requirements than for garments covered by part 4 of this standard series and lower requirements than for garments covered by part 2 of this standard series. Class AA garments generally offer protection, against the risks of the greatest diversity of riding activities, and they may have lower ergonomic and weight penalties than Class AAA garments.
Who is BS EN 17092-3 for?
BS EN 17092-3 on protective garments for motorcycle riders is relevant to:
- Protective garments manufacturers
- Motorcycle protective equipment manufacturers and suppliers
- Motorcycle manufacturers
- Road safety departments
Why should you use BS EN 17092-3 ?
Protective garments for motorcycle riders are essential to protect the rider from severe injuries in the event of a crash or accident.
BS EN 17092-3 helps users by providing the requirements that need to be considered for Class AA protective garments for motorcycle riders.
With the markings of risk category zones, performance requirements for Class AA garments covered under BS EN 17092-3 ensures safety of riders, irrespective of extent of impact or mechanical stress, in the event of an accident. The zones are identified as the areas of motorcyclists’ protective garments that have:
- Zone 1: High risk of damage e.g. impact, abrasion, and tearing
- Zone 2: Moderate risk of damage e.g. abrasion and tearing
- Zone 3: Low risk of damage e.g. abrasion and tearing
Adhering to performance requirements in compliance with BS EN 17092-3, will assure end-product users with a high degree of protection from impact and abrasion without reducing the ability of the rider to control the motorcycle. As a result, you will be able to foster credibility and reliability for your products, that can ultimately enhance prospects for access to newer markets.
