What is BS EN 1729-1-Functional dimensions for chairs and tables about?
BS EN 1729 is a European standard on furniture that discusses chairs and tables for educational institutions. BS EN 1729-1 provides the best industry guidance on the functional dimensions of chairs and tables for educational institutions to encourage good postures.
BS EN 1729-1 is the first part of a multi-part series that specifies functional dimensions and markings for all chairs, stools and tables, for educational institutions, including fixed and adjustable chairs and tables.
BS EN 1729-1 applies to both un-upholstered and upholstered chairs and stools as well as to both non-swivel and swivel chairs. BS EN 1729-1 also applies to furniture for use with laptop computers or portable devices.
Note 1: BS EN 1729-1 does not apply to ranked seating or special purpose workstations.
Note 2: BS EN 1729-1 does not apply to furniture used by teaching personnel.
Who is BS EN 1729-1-Functional dimensions for chairs and tables for?
BS EN 1729-1 on the functional dimensions for chairs and tables is useful for:
- Chairs and tables manufacturers
- Chairs and tables designers
- Chairs and tables test personnel
- Quality assurance authorities
Why should you use BS EN 1729-1-Functional dimensions for chairs and tables?
The purpose of dimensioning is to provide a clear and complete description of an object. A complete set of dimensions will permit only one interpretation needed to construct the part.
BS EN 1729-1 provides you with functional dimensions for chairs and tables, marking, Instruction, approval of range, and much more.
The functional dimensions provided by BS EN 1729-1 assist in improving the performance and quality of the chairs and tables and provide the manufacturing or construction personnel with the accurate dimensions they need without the need for them to add, subtract, or estimate distances.
The dimensions mentioned under BS EN 1729-1 also permit various interpretations of design; hence customs, educational practices, technical and financial circumstances of individual countries can be satisfied.
With obedience and compliance to BS EN 1729-1, you can enhance the efficacy of the chairs and tables and manufacture a standardized high-quality product.
What’s changed since the last update?
BS EN 1729-1:2015 supersedes EN 1729-1:2006, which is withdrawn. BS EN 1729-1:2015 has made some changes compared to the previous edition EN 1729-1:2006. These include:
- Addition of an annexe for functional dimensions of tall chairs
- Addition of an annexe for functional dimensions of stools and associated worksurfaces
- Key dimensions of chairs in Annexes A and D are measured using the school chair measuring device, some of them when the chair is loaded with specified loads
- A rationale for the functional dimensions of chairs and tables is provided
