BS EN 1755:2024

Industrial trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres. | Status: Current

1 Scope This document is applicable to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053‑1:2020 including their load handling devices and attachments (hereafter referred to as trucks) intended for use in potentially explosive atmospheres.

NOTE 1 Attachments mounted on the load carrier or on fork arms which are removable by the user are not considered to be a part of the truck.

This document specifies supplementary technical requirements for the prevention of the ignition of an explosive atmosphere of flammable gases, vapours, mists or dusts by industrial trucks of equipment group II and equipment category 2G, 3G, 2D or 3D.

NOTE 2 The relationship between an equipment category (hereafter referred to as category) and the corresponding zone (area classification) is shown in informative Annex B.

This document does not apply to:

• — trucks of equipment group I;
• — trucks of equipment group II, equipment category 1;
• — trucks intended for use in potentially explosive atmospheres with hybrid mixtures;
• — protective systems.

This document does not apply to trucks intended for use in potentially explosive atmospheres of carbon disulfide (CS2), carbon monoxide (CO) and/or ethylene oxide (C2H4O) due to the special properties of these gases. Technical requirements relating to lithium-ion batteries and fuel cells as energy sources are not given in this document due to their specific hazards.