BS EN 17878-2:2024

District heating pipes. Factory made flexible pipe systems with a lower temperature profile. Requirements and test methods for bonded systems with plastic service pipes | Status: Current

1 Scope This document specifies requirements and test methods for flexible, factory made, buried district heating pipe systems with plastic service pipes and bonding between the layers of the pipe assemblies. It is only applicable in conjunction with EN 17878‑1. This document is applicable to pipes, fittings, their joints and to joints with components made of non-plastics materials intended to be used for district heating installations. This document is applicable to a maximum operating temperature of 80 °C and maximum operating design pressure up to 1,0 MPa for a design service life of at least 50 years. This document does not apply to cover surveillance systems.

NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing are needed. Such requirements are not specified in this document.