What is BS EN 2267-012 - DZ family, single UV laser printable electrical cables about?
BS EN 2267 is a European standard on aerospace that discusses cables, electrical for general purposes. BS EN 2267-012 provides the product standard for the DZ family, a single UV laser printable for use in a low-pressure atmosphere to enhance the quality of cables.
BS EN 2267-012 is the 12th part of a multi-part series that specifies the characteristics of UV laser printable electrical wires DZ family for use in the onboard:
- 115 V (phase to neutral) or 200 V (phase to phase) electrical network of aircraft
- 230 V (phase to neutral) or 400 V (phase to phase) electrical network of aircraft and particularly use in non-pressurized areas
This cable family is used at operating temperatures between -65°C and 260°C. These cables are demonstrated to be arc-resistant for both networks (115V and 230 V).
It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.
Who is BS EN 2267-012 - DZ family, single UV laser printable electrical cables for?
BS EN 2267-012 on DZ family, single UV laser printable electrical cables is useful for:
- Aerospace avionic electrical and fibre optic technology
- Aerospace products manufacturers
- Design engineers
- Quality control personnel
Why should you use BS EN 2267-012 - DZ family, single UV laser printable electrical cables?
Aerospace electrical cables sustain intense vibration during take-off, flight, and landing, while also being subject to harsh environmental conditions. Cable faults cost money and create disruption, so there is an enormous demand for cable test techniques to ensure cables and joints are in good condition.
BS EN 2267-012 provides you with data regarding materials and construction of conductors and insulators and provides instruction on the colour coding of cores.
The guidelines under BS EN 2267-012 guide you on resistance to wet arc tracking, deformation, crush, humidity, surface, overload, fire, and insulation resistance.
BS EN 2267-012 also specifies quality assurance, designation, marking, packaging, and storing of cables, that assists you in maintaining the high quality of cables.
With obedience and compliance to BS EN 2267-0012, you can enhance the efficacy of electrical cables and manufacture a standardized high-quality product to increase the reliability of your products and build trust in their use throughout the aerospace supply chain.
