What is BS EN 28510-1 - Peel test for a flexible-bonded-to-rigid test specimen assembly about?
BS EN 28510-1 specifies a 90° peel test for the determination, under specified conditions, of the peel resistance of a bonded assembly of two adherends where at least one adherend is flexible. If a normal tensile testing machine is used for the test, the peel angle will not be constant at exactly 90º. If a constant angle of exactly 90° is required, a roller peeling device is used (see 4.1).
BS EN 28510-1 is particularly suitable for use with less flexible adherends for which a 180° peel test is not suitable because the adherends crack, break or delaminate.
A 180º peel test is described in EN ISO 8510-2.
Who is BS EN 28510-1 - Peel test for a flexible-bonded-to-rigid test specimen assembly for?
BS EN 28510-1 on Adhesives is useful for:
- Any entity responsible for testing adhesives
- Chemical Engineers
- Manufacturers of wood products
- Interior designers
Why should you use BS EN 28510-1 - Peel test for a flexible-bonded-to-rigid test specimen assembly?
Adhesive is a substance that binds materials together by surface attachment to prevent separation.
BS EN 28510-1 provides peel test for flexible-bonded-to-rigid test specimen assembly. The test method outlined in BS EN 28510-1 helps in increasing the life of adhesives at different climatic conditions.
BS EN 28510-1 provides you with apparatus, sampling, transport, storage, and preparation of test pieces, preparation of reagents and apparatus, pre-treatment of test pieces, test procedure, and much more.
Using BS EN 28510-1 you can get help in determining the durability and tensile strength under referenced conditions. By using BS EN 28510-1 you can manufacture better quality and durable products.
