What is BS EN 3645-008 - Product standard for non-release plug with a grounding ring about?
BS EN 3645 is a European standard on aerospace that discusses Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous. BS EN 3645-008 provides the product standard for non-release plugs with a grounding ring to enhance their performance.
BS EN 3645-008 is the eighth part of a multi-part series that specifies the characteristics of plugs with grounding rings in the family of circular, electrical connectors, with triple start threaded coupling.
BS EN 3645-008 applies to models in Table 2.
For contacts, sealing plugs, and cable outlet accessories associated with this plug see EN 3645‑002. For receptacles and protective covers, see EN 3645‑003, EN 3645‑004, EN 3645‑005, EN 3645‑007, EN 3645‑009, and EN 3645‑010 respectively.
These connectors are derived from and interchangeable with models W, J, K, F, M, and Z in specification MIL-DTL-38999/26.
Who is BS EN 3645-008 - Product standard for non-release plug with a grounding ring for?
BS EN 3645-008 on product standard for non-release plug with a grounding ring is useful for:
- Spacecraft and space products manufacturers
- Aerospace and defence industries
- Aerospace avionic electrical and fibre optic technology
- Design engineers for electrical contacts
- Aerospace electric equipment manufacturers
- Quality control personnel for electrical contacts
Why should you use BS EN 3645-008 - Product standard for non-release plug with a grounding ring?
Grounding rings are used to suppress electrical interference at the installation location for electromagnetic flowmeters. They are provided in pairs and are installed upstream and downstream of the flow meter.
An electrical connector is a device that connects two active devices to transmit current or signals.
The guidelines provided in BS EN 3645-008 assist you in selecting the right plugs as well as a suitable connector to improve the production process. If an electronic component fails, the failed component can be replaced when an electrical connector is installed.
The guidelines under BS EN 3645-008 provide you with the required characteristics of plugs such as mass, materials, and surface treatment. BS EN 3645-008 covers dimensional, electrical, mechanical, and climatic characteristics of plugs with grounding rings.
BS EN 3645-008 also covers the terms and definitions, required characteristics, designation, markings, and technical specifications of the protective cover for the plug.
BS EN 3645-008 assists design engineers in designing plugs with grounding rings as per specifications that enhance the reliability of their products.
With obedience and compliance to BS EN 3645-008, you can enhance the efficacy of plugs and manufacture a standardized high-quality product to increase the reliability of your products and build trust in their use throughout the aerospace supply chain.
