What is BS EN 4710-05 - Spring clamp about?
BS EN 4710-05 is a European Standard. BS EN 4710-05 is the 5th part of the Quick release fastening systems for non-structural applications Aerospace series that specifies Two ways tolerance compensation Licensed. BS EN 4710-05 has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN).
BS EN 4710-05 consists of scope, references, requirements, designation, marking, and technical specifications.
BS EN 4710-05 specifies the dimensions, mass, tolerances, and static values of catch spring for use in fuselage interior equipment and non-structural or secondary structural area. BS EN 4710-05 is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-02. The applicable temperature range is -55 °C to 85 °C.
Note 1: This European Standard is to be used in conjunction with EN 4710-06 and EN 4710-07 as described in EN 4710-02.
Note 2: The applicable temperature range is -55 °C to 85 °C.
Who is BS EN 4710-05 - Spring clamp for?
BS EN 4710-05 on Spring clamp is useful for:
- Manufacturers and suppliers of Spring Clamps
- Mechanical and Product design engineers
- Aerospace and Aircraft Companies
- Aerospace and Defence Industry
- Aerospace and Aeronautical engineers
- Testing agencies involved in the inspection of aerospace products
- Mechanical engineers
Why should you use BS EN 4710-05 - Spring clamp?
Spring clamps are lightweight and apply clamping pressure quickly. They are also tamper-resistant. Two ways tolerance compensation can provide more flexibility in production. Demands on dimensional accuracy are reduced too.
BS EN 4710-05 specifies the dimensions, mass, tolerances, and static values of catch spring for
use in fuselage interior equipment and non-structural or secondary structural area.
Using BS EN 4710-05 will ensure maximum precision and a lot more advantages without compromising product quality. It is essential to adhere to BS EN 4710-05 because of the critical application of spring clamps. Adhering to BS EN 4710-05 will ensure high credibility and maximum safety.
