What is BS EN 50090-3-3 - HBES Interworking model and common HBES data types about?
BS EN 50090-3-3 is a European standard that discusses the HBES Interworking model and common HBES data types. BS EN 50090-3-3 gives general guidelines and recommendations to ensure interworking between HBES devices made by different manufacturers. BS EN 50090-3-3 also contains design guidelines for the design of Functional Blocks and new datapoint types, the building blocks of HBES interworking.
BS EN 50090-3-3 is used as a basis to design application specifications relative to an Application Domain. If designed and supported by a large group of manufacturers, such application specifications will ensure to end customers a high degree of interoperability between products based on the HBES Communication System of different manufacturers.
Note: BS EN 50090-3-3 is not intended to be used as a stand-alone standard.
Who is BS EN 50090-3-3 - HBES Interworking model and common HBES data types for?
BS EN 50090-3-3 on the HBES Interworking model and common HBES data types is useful for:
- HBES devices manufacturers and suppliers
- Quality control personnel
- Service providers and installers
Why should you use BS EN 50090-3-3 - HBES Interworking model and common HBES data types?
Such an Interworking is only possible if a set of requirements is complied with as defined in an
Interworking model. For this, Functional Blocks need to be defined, which in turn specify Datapoints and the communication mechanisms to be used.
The guidelines and recommendations provided by BS EN 50090-3-3 assist in improving the performance and quality of the to ensure interworking between HBES devices for its use in different application domains and installation types, and in “Service Network” environments.
BS EN 50090-3-3 provides you with comprehensive information useful throughout the process of production. With obedience and compliance to BS EN 50090-3-3, you can enhance the efficacy of the HBES device and manufacture a standardized high-quality product.
