What is BS EN 50131-2-4about?
BS EN 50131-2-4 specifies for combined passive infrared and microwave detectors installed in buildings and provides for security grades 1 to 4, specific or non-specific wired or wire-free detectors, and uses environmental classes I to IV.
For a combined detector where both detection technologies need to be in their activated state in order to generate an alarm condition, the grade-dependent requirements of BS EN 50131-2 apply.
Note:
BS EN 50131-2-4 does not include requirements for detectors intended for use outdoors.
Requirements for system interconnections are not included in BS EN 50131-2-4.
Who is BS EN 50131-2-4for?
BS EN 50131-2-4on requirements for combined passive infrared and microwave detectors is useful for:
- Alarm security centres
- Consultants
- Installers and Maintainers in the electronic security sector
- Manufacturers of alarm systems
- Security management teams of building
Why should you use BS EN 50131-2-4?
A Commercial hold-up system is a silent alarm, which is generated when an alarm user manually activates a device (button, floor pedal, money clip, key fobs, pendants, etc.) that is intended to alert the monitoring company that a robbery is in progress.
The purpose of the detector is to detect the broad-spectrum infrared radiation emitted by an intruder, to emit microwave signals and analyse the signals that are returned and to provide the necessary range of signals or messages to be used by the rest of the intrusion alarm system.
BS EN 50131-2-4 deals with combined passive infrared and microwave detectors (to be referred to as the detector) that can be used as part of intrusion alarm systems installed in buildings. It includes four security grades and four environmental classes.
BS EN 50131-2-4 is useful as the devices mentioned are used to determine the presence of human intruders by sensing the broad-spectrum infrared emitted by a human being and differences between emitted and reflected microwave signals due to the associated movement.
BS EN 50131-2-4 offers high interference immunity, high precision, and high reliability. These features will make your product an excellent choice for businesses, as they contribute to increasing market demand and profitability.
What’s changed since the last update?
BS EN 50131-2-4:2020supersedes EN 50131-2-4:2008, which is withdrawn.
Some of the following significant technical changes:
- Editorial changes and refinement of wording
- Clarification to the significant reduction of range requirements
- Addition of requirements, tests, and corresponding Annexes throughout the overall standard, to support ceiling mounted detectors
- Improvement of the requirements of the supplied documentation
- Addition of chapter which defines the condition for the mounting height while the tests are performed
