What is BS EN 50180-3- Bushing fixations about?
BS EN 50180 is a European standard that discusses bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid-filled transformers.
BS EN 50180-3 is the third part of the multi-series that discusses requirements for bushing fixations. BS EN 50180-3 was extended for fastenings of bushings for a highest voltage of 52 kV. This information is of importance for utilities concerning compatibility.
It should be considered in factual context with EN 50180‑1 only. Constructional details for fastenings and their details are supplementing EN 50180‑1.
Who is BS EN 50180-3 - Bushing fixations for?
BS EN 50180-3 on bushings is relevant to:
- Manufacturers of bushings
- Manufacturers of liquid-filled transformers
- Manufacturers of electrical insulation devices
- Electrical engineers
- Electrical industry
- Mechanical industry
Why should you use BS EN 50180-3 - Bushing fixations?
In electrical power, a bushing is a device that poses as an insulating barrier between the live conductor and the metallic body of the electrical apparatus. For this, it is critical that the fixation components for bushings meet the required level of performance for the smooth functioning of the end-application.
In the context of BS EN 50180-3, the fixation of the bushing is made with a flange ring and a defined number of clamping paws.
BS EN 50180-3 provides you with standardized dimensions for these fixation components, along with best industry guidance on material for flange rings.
If you are a manufacturer of bushings and its fixation components, compliance with BS EN 50180-3 can ensure your products meet adequate performance requirements, while catering to the specific needs of the electrical application.
