BS EN 50272-1:2010 Safety requirements for secondary batteries and battery installations. General safety information
BS EN 50272-1 is a European Standard which specifies safety requirements for secondary batteries and battery installations with nominal voltages up to DC 1 500 V (low voltage directive).
It specifies the basic requirements referred to in the other parts of the standard as follows:
- Part 2 Stationary batteries
- Part 3 Traction batteries
- Part 4 Batteries for use in portable appliances
Requirements for safety, reliability, life expectancy, mechanical strength, cycle stability, internal resistance, and battery temperature, are determined by the application. This, in turn, determines the selection of the battery design and technology.
In general, the requirements and definitions are specified for lead-acid and nickel-cadmium batteries. For other battery systems, the requirements may be applied accordingly.
BS EN 50272-1 covers safety aspects taking into account hazards associated with:
Electricity (installation, charging, discharging, etc.)
Electrolyte
Inflammable gas mixtures
Storage and transportation.
With respect to electrical safety, reference is made to EN 60364-4-41.
Contents of BS EN 50272-1:
1 Scope
2 Normative references
3 Definitions
4 General Information
4.1 General
4.2 Charge
4.3 Discharge
4.4 Superimposed AC current / ripple current
5 Protection against electric shock
6 Disconnection and separation
7 Commissioning and putting batteries into operation
7.1 Delivery conditions of batteries 7.2 Electrolyte and topping up water (for vented / flooded type cells only)
7.3 Commissioning
8 Limit values and correction factors
8.1 General
8.2 Rated capacity and depth of discharge
8.3 Charge current, charge voltage
8.4 External short circuit
8.5 Battery temperature
9 Provisions against explosion hazards
10 Provision against electrolyte hazards
11 Marking, labeling and instructions
12 Transport and storage
13 Disposal and environmental aspects
Bibliography
